Premium Information is available for this item - Upgrade for $1 a day
5307-01-436-5434
Self-Locking Stud
5307014365434 014365434 12448496-3 RCSK15105-3
A headed fastener threaded externally on a portion or on the full length of the shank. The head has projections on the underside or periphery, or is otherwise designed to be mechanically pressed and embedded in a metallic panel, or the like. It is securely locked in position by the displaced metal. For items that require locking rings, see BOLT, SELF-LOCKING and STUD, LOCKED IN. Excludes INSERT, SCREW THREAD. View more Self-Locking Stud
November 2023
1
Marketplace 5307-01-436-5434
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-436-5434 5+ Documents (More...)
5307-01-436-5434 Stud, Hollow 162 12448496-4 5306-01-439-0282 Stud, Hollow 163 12448516-1 5340-01-
5307-01-436-5434 117 9 19207 12448496-4 5306-01-439-0282 117 9 19207 12448500 5360-01-407-4782 110
Restrictions 5307-01-436-5434
5307-01-436-5434 is a Self-Locking Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-436-5434
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- HD
Approved Sources 5307-01-436-5434
- Part Number
- Manufacturer
- Status
- 12448496-3
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- RCSK15105-3
- 34623 - Am General Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-436-5434
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Head Diameter [AASL]
- 1.310 Inches Nominal
- Head Length [AASV]
- 0.310 Inches Nominal
- Material [MATT]
- Steel Comp 1335H Or Steel Comp 1340H Or Steel Comp 4140H Or Steel Comp 8637H Or Steel Comp 8640H Or Steel Comp 1335 Or Steel Comp 1340 Or Steel Comp 4135 Or Steel Comp 4140 Or Steel Comp 5135 Or Steel Comp 5140 Or Steel Comp 8637 Or Steel Comp 8640 Or Steel Comp 8740
- Nominal Thread Size [CQJX]
- 0.750 Inches Nut Thread
- Locking Feature [AAUM]
- Knurled Shank
- Material Document And Classification [MDCL]
- Astm A304 Assn Std 1St Material Response Or Astm A304 Assn Std 2Nd Material Response Or Astm A304 Assn Std 3Rd Material Response Or Astm A304 Assn Std 4Th Material Response Or Astm A304 Assn Std 5Th Material Response Or Astm A331 Assn Std 6Th Material Response Or Astm A331 Assn Std 7Th Material Response Or Astm A331 Assn Std 8Th Material Response Or Astm A331 Assn Std 9Th Material Response Or Astm A331 Assn Std 10Th Material Response Or Astm A331 Assn Std 11Th Material Response Or Astm A331 Assn Std 12Th Material Response Or Astm A331 Assn Std 13Th Material Response Or Astm A331 Assn Std 14Th Material Response
- Overall Length [ABHP]
- 3.470 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Stud, Hub
- Special Features [FEAT]
- Threaded Longitudinal Hole (0.375-18 Npt) In Head End; Nut End: Externally Threaded (0.375-18 Npt) 0.560 Inches Long
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Quantity Per Inch [CMLP]
- 16 Nut Thread
- Style Designator [STYL]
- Knurled Shank
- Surface Treatment Document And Classification [STDC]
- Astm B633 Ty2 Cl5 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Zinc Overall And Chromate Overall
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Direction [AAJF]
- Left-Hand Nut Thread
- Thread Length [AASA]
- 1.290 Inches Nominal Nut Thread
Weapon Systems (WSDC) 5307-01-436-5434
DLA Procurement Analysis 5307-01-436-5434
- Last Stock Position:
- 55 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-436-5434
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-01-436-5434
Freight Information 5307-01-436-5434
5307-01-436-5434 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093470. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS I/S. 5307-01-436-5434 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48940 which rates the freight between FCL and LCL. 5307-01-436-5434 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-436-5434 is not classified as a special type of cargo when transported by water. 5307-01-436-5434 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-436-5434
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-01-436-5434 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: