Premium Information is available for this item - Upgrade for $1 a day
5307-01-432-3410
Plain Stud
5307014323410 014323410 MIL-DTL-1222 845-64712984L1 MIL-S-1222L1 845-6712984 MIL-S-1222
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
May 2023
4
Marketplace 5307-01-432-3410
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-432-3410 5+ Documents (More...)
MIL-S-1222 STUD,PLAIN 1722 EA NS Request Quotation MIL-DTL-1222 STUD,PLAIN 210 EA NS Request Quotation
MIL-S-1222 STUD,PLAIN 117 EA NS Request Quotation MIL-S-1222L1 STUD,PLAIN 26 EA NS Request Quotation
/fsg-53/fsc-5330/us
Gasket 5330014323565 014323565,6712984 PC 229A 845-6712984 PC 229A 845-6712984 PC 229AL1 2621-713 PC
PC 229A 845-6712984 PC 229AL1 2621-713-01 PIECE 229A L1 6712984 PC 229AL1 An item PC 229A845-6712984
Plain Stud 5307014323410 014323410 Strainer Element4730014438761 014438761 845-6712984 PC 229A 845-6712984
PC 229A 845-6712984 PC 229AL1 2621-713-01 PIECE 229A L1 6712984 PC 229AL1 An item PC 229A845-6712984
MIL-S-1222L1 STUD,CONTINUOUS THREAD 6 BX NS Request Quotation MIL-S-1222 STUD,CONTINUOUS THREAD 25 BX
MIL-DTL-1222 STUD,CONTINUOUS THREAD 210 BX NS Request Quotation MIL-S-1222 STUD,CONTINUOUS THREAD 1722
MIL-S-1222 STUD,CONTINUOUS THREAD 25 BX NS Request Quotation MIL-S-1222L1 STUD,CONTINUOUS THREAD 6 BX
MIL-S-1222 STUD,CONTINUOUS THREAD 117 BX NS Request Quotation MIL-S-1222L1 STUD,CONTINUOUS THREAD 26
Restrictions 5307-01-432-3410
IUID Required
5307-01-432-3410 is a Plain Stud that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-432-3410
- US Navy (N1H5)
- Effective Date:
- 1 Jun 1996
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 5307-01-432-3410
- Part Number
- Manufacturer
- Status
- MIL-DTL-1222
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 845-64712984L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-S-1222L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 845-6712984
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-S-1222
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-432-3410
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Criticality Code Justification [CRTL]
- Zzzw
- Departure From Cited Document [ZZZW]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- End Item Identification [AGAV]
- Strainer Y-Type
Management Data 5307-01-432-3410
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5307-01-432-3410
Freight Information 5307-01-432-3410
5307-01-432-3410 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5307-01-432-3410 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5307-01-432-3410 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5307-01-432-3410 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-432-3410 is not classified as a special type of cargo when transported by water. 5307-01-432-3410 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-432-3410
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 12
- No Requirement