Premium Information is available for this item - Upgrade for $1 a day
5307-01-392-8488
Shouldered Stud
5307013928488 013928488 03A193-8-2-2 HL360-8-2-2
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
June 2023
12
Marketplace 5307-01-392-8488
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-392-8488 2+ Documents (More...)
Restrictions 5307-01-392-8488
5307-01-392-8488 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-392-8488
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5307-01-392-8488
- Part Number
- Manufacturer
- Status
- 03A193-8-2-2
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- HL360-8-2-2
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 03A193-8-2-2
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 5M902 - Howmet Global Fastening Systems Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- HL360-8-2-2
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- HL360-8-2-2
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- HL360-8-2-2
- 17446 - Huck International, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5307-01-392-8488
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material [MATT]
- Titanium Alloy Uns R56400
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.250 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.120 Inches Minimum And 0.130 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 4928 Assn Std Single Material Response Or Ams 4967 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.415 Inches Minimum And 0.440 Inches Maximum
- Shoulder Length [AAVK]
- 0.080 Inches Minimum And 0.090 Inches Maximum
- Overall Length [ABHP]
- 1.125 Inches Nominal
- Special Features [FEAT]
- Cetyl Alcohol Lube (700 Deg. F). Hexagon Socket Drive On Both Ends, 0.094 In. Nominal Width Across Flats
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Series Designator [THSD]
- Unjf Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.120 Inches Minimum And 0.130 Inches Maximum
- Style Designator [STYL]
- Shouldered
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Length [AASA]
- 0.395 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.395 Inches Nominal Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 28 Stud Thread
DLA Procurement Analysis 5307-01-392-8488
Management Data 5307-01-392-8488
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-01-392-8488
Freight Information 5307-01-392-8488
5307-01-392-8488 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-392-8488 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-392-8488 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-392-8488 is not classified as a special type of cargo when transported by water. 5307-01-392-8488 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-392-8488
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-01-392-8488 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: