Premium Information is available for this item - Upgrade for $1 a day
5307-01-391-2092
Shouldered Stud
5307013912092 013912092 HL360-6-2-10 03A193-6-2-10
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
11
Marketplace 5307-01-391-2092
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-391-2092 1+ Documents (More...)
Restrictions 5307-01-391-2092
5307-01-391-2092 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-391-2092
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5307-01-391-2092
- Part Number
- Manufacturer
- Status
- HL360-6-2-10
- Manufacturer
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HL360-6-2-10
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HL360-6-2-10
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL360-6-2-10
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL360-6-2-10
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL360-6-2-10
- 5M902 - Howmet Global Fastening Systems Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL360-6-2-10
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL360-6-2-10
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- HL360-6-2-10
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 03A193-6-2-10
- 1W025 - Northrop Grumman Systems Corp (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5307-01-391-2092
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material [MATT]
- Titanium Alloy Uns R56400
- Nominal Thread Size [CQJX]
- 0.190 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.190 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.1890 Inches Minimum And 0.1895 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.120 Inches Minimum And 0.130 Inches Maximum
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response Or Ams4967 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.357 Inches Minimum And 0.377 Inches Maximum
- Shoulder Length [AAVK]
- 0.064 Inches Minimum And 0.074 Inches Maximum
- Overall Length [ABHP]
- 1.094 Inches Nominal
- Special Features [FEAT]
- Double Hex Point Drive, Protruding Tension Head, 160 Ksi Ftu
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 32 Stud Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.1890 Inches Minimum And 0.1895 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- Style Designator [STYL]
- Shouldered
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Length [AASA]
- 0.325 Inches Nominal Stud Thread
- Thread Length [AASA]
- 0.325 Inches Nominal Nut Thread
DLA Procurement Analysis 5307-01-391-2092
Management Data 5307-01-391-2092
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-391-2092
Freight Information 5307-01-391-2092
5307-01-391-2092 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-391-2092 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-391-2092 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-391-2092 is not classified as a special type of cargo when transported by water. 5307-01-391-2092 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-01-391-2092 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: