Premium Information is available for this item - Upgrade for $1 a day
5307-01-384-3183
Plain Stud
5307013843183 013843183 12132F18 ITEM 178A 11961D18L1 12132F18 ITEM 178AL1 12132F18-178AL1 PL-12132F18 ITEM 178AL1 PL-12132F18 ITEM 178A 12132F18-178A 11961D18 12132F18 ITEM 178
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
November 2023
3
Marketplace 5307-01-384-3183
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-384-3183 1+ Documents (More...)
Restrictions 5307-01-384-3183
IUID Required
5307-01-384-3183 is a Plain Stud that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-384-3183
- US Navy (N1H5)
- Effective Date:
- 1 Dec 1993
- Supplementary Collaborators:
- HX
- Supplementary Receivers:
- GG
Approved Sources 5307-01-384-3183
- Part Number
- Manufacturer
- Status
- 12132F18-178A
- Manufacturer
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Incomplete Reference
- Incomplete Reference
- 11961D18
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 12132F18 ITEM 178A
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- PL-12132F18 ITEM 178A
- 0UBG9 - Curtiss-Wright Electro-Mechanical (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 11961D18L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 12132F18 ITEM 178AL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 12132F18-178AL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- PL-12132F18 ITEM 178AL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- PL-12132F18 ITEM 178A
- 88032 - Curtiss-Wright Electro-Mechanical (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 12132F18-178A
- 88032 - Curtiss-Wright Electro-Mechanical (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 11961D18
- 88032 - Curtiss-Wright Electro-Mechanical (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 12132F18 ITEM 178
- 88032 - Curtiss-Wright Electro-Mechanical (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-384-3183
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Criticality Code Justification [CRTL]
- Zzzy
- Material [MATT]
- Nickel Alloy
- Reference Number Differentiating Characteristics [ZZZY]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Overall Length [ABHP]
- 8.120 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand Stud Thread
Management Data 5307-01-384-3183
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5307-01-384-3183
Freight Information 5307-01-384-3183
5307-01-384-3183 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5307-01-384-3183 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5307-01-384-3183 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5307-01-384-3183 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-384-3183 is not classified as a special type of cargo when transported by water. 5307-01-384-3183 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-384-3183
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box