Premium Information is available for this item - Upgrade for $1 a day
5307-01-346-2274
Shouldered Stud
5307013462274 013462274 1D41292 ITEM 7 526C650-051
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
2
Marketplace 5307-01-346-2274
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-346-2274 1+ Documents (More...)
United States (US) 4. 5307-01-346-2274 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5307-01-346-2274 RQST NE Updated Every Day 5307-01-346-2274 RQST
Restrictions 5307-01-346-2274
5307-01-346-2274 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-346-2274
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5307-01-346-2274
- Part Number
- Manufacturer
- Status
- 1D41292 ITEM 7
- Manufacturer
- 90099 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 526C650-051
- 90099 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5307-01-346-2274
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.625 Inches Nut Thread0.625 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.480 Inches Nominal
- Nut End Shank Length [ADDB]
- 0.266 Inches Nominal
- Material Document And Classification [MDCL]
- 10305Du Cagec 90099 Mfr Ref Single Material Response
- Shoulder Diameter [AAVH]
- 0.750 Inches Nominal
- Shoulder Length [AAVK]
- 1.000 Inches Nominal
- Overall Length [ABHP]
- 6.350 Inches Minimum And 6.380 Inches Maximum
- Thread Series Designator [THSD]
- Unc Nut Threadunc Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.480 Inches Nominal
- Stud End Shank Length [CSJZ]
- 0.266 Inches Nominal
- Style Designator [STYL]
- Shouldered
- Thread Direction [AAJF]
- Right-Hand Nut Threadright-Hand Stud Thread
- Thread Class [AAJD]
- 2A Nut Thread2a Stud Thread
- Thread Length [AASA]
- 3.821 Inches Minimum Nut Thread And 3.881 Inches Maximum Nut Thread0.687 Inches Minimum Stud Thread And 0.717 Inches Maximum Stud Thread
- Thread Quantity Per Inch [CMLP]
- 11 Nut Thread11 Stud Thread
DLA Procurement Analysis 5307-01-346-2274
Management Data 5307-01-346-2274
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5307-01-346-2274
Freight Information 5307-01-346-2274
5307-01-346-2274 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-346-2274 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-346-2274 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-346-2274 is not classified as a special type of cargo when transported by water. 5307-01-346-2274 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-346-2274
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-01-346-2274 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: