Premium Information is available for this item - Upgrade for $1 a day
5307-01-298-0202
Shouldered Stud
5307012980202 012980202 114276-4
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
September 2023
4
Marketplace 5307-01-298-0202
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-298-0202 1+ Documents (More...)
United States (US) 4. 5307-01-298-0202 Marketplace Restrictions Approved Sources Datasheet Management
STUD,SHOULDERED 83 EA NS Request Quotation Updated Every Day 5307-01-298-0202 RQST NE Updated Every
Restrictions 5307-01-298-0202
5307-01-298-0202 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-298-0202
- US Air Force (FGGX)
- Effective Date:
- 1 Aug 2012
- Former MOE Rule:
- FXGI
- Singapore (YJ01)
- Effective Date:
- 1 Sep 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5307-01-298-0202
- Part Number
- Manufacturer
- Status
- 114276-4
- Manufacturer
- 09344 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-298-0202
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material [MATT]
- Steel Comp Xm-13
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.250 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.2492 Inches Minimum And 0.2497 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.470 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.428 Inches Minimum And 0.432 Inches Maximum
- Shoulder Length [AAVK]
- 0.100 Inches Nominal
- Overall Length [ABHP]
- 1.703 Inches Nominal
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Series Designator [THSD]
- Unjf Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.311 Inches Minimum And 0.313 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.493 Inches Nominal
- Style Designator [STYL]
- Shouldered
- Surface Treatment Document And Classification [STDC]
- Mil-C-14538 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Chromate Overall
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Length [AASA]
- 0.360 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.280 Inches Nominal Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 28 Stud Thread
Weapon Systems (WSDC) 5307-01-298-0202
DLA Procurement Analysis 5307-01-298-0202
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-298-0202
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FX
- F-15 EAGLE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-298-0202
Freight Information 5307-01-298-0202
5307-01-298-0202 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-298-0202 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-298-0202 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-298-0202 is not classified as a special type of cargo when transported by water. 5307-01-298-0202 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-298-0202
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-298-0202 4 Records
Contracting Technical Data File (CTDF) 5307-01-298-0202 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: