Premium Information is available for this item - Upgrade for $1 a day
5307-01-270-1299
Shouldered And Stepped Stud
5307012701299 012701299 6409860-1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
May 2023
2
Marketplace 5307-01-270-1299
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-270-1299 1+ Documents (More...)
Restrictions 5307-01-270-1299
5307-01-270-1299 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-270-1299
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5307-01-270-1299
- Part Number
- Manufacturer
- Status
- 6409860-1
- Manufacturer
- 55974 - Honeywell Intl Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-270-1299
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec All Material Responses
- Material [MATT]
- Steel Comp 302 Or Steel Comp 304
- Nominal Thread Size [CQJX]
- 0.086 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.112 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.113 Inches Minimum And 0.114 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.137 Inches Minimum And 0.138 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.218 Inches Nominal
- Shoulder Length [AAVK]
- 0.020 Inches Minimum And 0.030 Inches Maximum
- Overall Length [ABHP]
- 0.500 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 40 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 56 Nut Thread
- Thread Series Designator [THSD]
- Unc Nut Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.060 Inches Nominal
- Stud End Shank Length [CSJZ]
- 0.075 Inches Minimum And 0.085 Inches Maximum
- Style Designator [STYL]
- Shouldered And Stepped
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.077 Inches Minimum Stud Thread And 0.078 Inches Maximum Stud Thread
- Thread Length [AASA]
- 0.111 Inches Nominal Nut Thread
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Class [AAJD]
- 2A Stud Thread
Weapon Systems (WSDC) 5307-01-270-1299
DLA Procurement Analysis 5307-01-270-1299
Management Data 5307-01-270-1299
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-270-1299
Freight Information 5307-01-270-1299
5307-01-270-1299 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-270-1299 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-270-1299 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-270-1299 is not classified as a special type of cargo when transported by water. 5307-01-270-1299 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-270-1299
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-01-270-1299 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: