Premium Information is available for this item - Upgrade for $1 a day
5307-01-218-9934
Continuous Thread Stud
5307012189934 012189934 STUD END 11/32, NUT END 119/32 MIL-DTL-1222 TYPE III STYLE D 5/8-11UNC-3A-2A X 3 1/4LG STUD END 11/32, NUT END 119/32L1 947037-02L1 042-021983 PIECE 12L1 MIL-DTL-1222 TYPE III STYLE DL1 5/8-11UNC-3A-2A X 3 1/4LGL1 947037-02 042-021983 PIECE 12
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
January 2024
8
Marketplace 5307-01-218-9934
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-218-9934 2+ Documents (More...)
Restrictions 5307-01-218-9934
IUID Required
5307-01-218-9934 is a Continuous Thread Stud that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-218-9934
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5307-01-218-9934
- Part Number
- Manufacturer
- Status
- 947037-02
- Manufacturer
- 66850 - Pentair Valves & Controls Us Lp (Obsolete)
- Original Design
- Original Design
- STUD END 11/32, NUT END 119/32
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-DTL-1222 TYPE III STYLE D
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 5/8-11UNC-3A-2A X 3 1/4LG
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- STUD END 11/32, NUT END 119/32L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 947037-02L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 042-021983 PIECE 12L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MIL-DTL-1222 TYPE III STYLE DL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 5/8-11UNC-3A-2A X 3 1/4LGL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 042-021983 PIECE 12
- 66850 - Pentair Valves & Controls Us Lp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-218-9934
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- End Item Identification [AGAV]
- Trap Stm Thrmody 1.00Ips Flge 600Psi Horz
- Part Name Assigned By Controlling Agency [CXCY]
- Stud, Constant Strength (Inavy)
- Special Features [FEAT]
- Stud, Constant Strength (Requested Name)
Management Data 5307-01-218-9934
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5307-01-218-9934
Freight Information 5307-01-218-9934
5307-01-218-9934 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-218-9934 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-218-9934 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-218-9934 is not classified as a special type of cargo when transported by water. 5307-01-218-9934 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-218-9934
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Heated General Purpose – Heated 40 F and above
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 3.5" H x 2.5" W x 2.5" L
- --
- --
- --
- Any Suitable Process
- 3.5" H x 2.5" W x 2.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Open for inspection or use only
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --