Premium Information is available for this item - Upgrade for $1 a day
5307-01-217-3113
Shouldered Stud
5307012173113 012173113 8019046-001
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
November 2023
4
Marketplace 5307-01-217-3113
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-217-3113 1+ Documents (More...)
United States (US) 4. 5307-01-217-3113 Marketplace Restrictions Approved Sources Datasheet Management
Every Day 5307-01-217-3113 RQST NE Updated Every Day 5307-01-217-3113 RQST Updated Every Day 5307-01-
Restrictions 5307-01-217-3113
5307-01-217-3113 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-01-217-3113
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FUKZ
Approved Sources 5307-01-217-3113
- Part Number
- Manufacturer
- Status
- 8019046-001
- Manufacturer
- 58259 - Ballistic Missile Office /Afsc/ (Obsolete)
- Original Design
- Original Design
Datasheet 5307-01-217-3113
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Nominal Thread Size [CQJX]
- 0.060 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.060 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.058 Inches Minimum And 0.060 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.070 Inches Minimum And 0.072 Inches Maximum
- Material Document And Classification [MDCL]
- Astm B541-75,Cond Ht-Cw Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.180 Inches Minimum And 0.190 Inches Maximum
- Shoulder Length [AAVK]
- 0.024 Inches Minimum And 0.026 Inches Maximum
- Overall Length [ABHP]
- 0.263 Inches Nominal
- Special Features [FEAT]
- Material Is Gold Electrical Contact Alloy
- Style Designator [STYL]
- Shouldered
- Surface Finish [CSYM]
- 32.0 Microinches Overall
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Class [AAJD]
- 2A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.039 Inches Nominal Stud Thread
- Thread Length [AASA]
- 0.109 Inches Nominal Nut Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 80 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 80 Stud Thread
Weapon Systems (WSDC) 5307-01-217-3113
DLA Procurement Analysis 5307-01-217-3113
- Last Stock Position:
- 10 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-217-3113
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AI
- ADVANCED INTERCONTINENTAL BALLISTIC (MX)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5307-01-217-3113
Freight Information 5307-01-217-3113
5307-01-217-3113 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-217-3113 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-217-3113 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 575 for ocean manifesting and military sealift. 5307-01-217-3113 is not classified as a special type of cargo when transported by water. 5307-01-217-3113 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-01-217-3113 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: