Premium Information is available for this item - Upgrade for $1 a day
5307-01-203-4004
Plain Stud
5307012034004 012034004 10084-002
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
May 2023
3
Marketplace 5307-01-203-4004
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-203-4004 2+ Documents (More...)
Restrictions 5307-01-203-4004
5307-01-203-4004 is a Plain Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-203-4004
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FUKZ
Approved Sources 5307-01-203-4004
- Part Number
- Manufacturer
- Status
- 10084-002
- Manufacturer
- 10396 - Hercules Inc (Obsolete)
- Original Design
- Original Design
Datasheet 5307-01-203-4004
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material [MATT]
- Steel Comp H11
- Nominal Thread Size [CQJX]
- 0.375 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.375 Inches Stud Thread
- Material Document And Classification [MDCL]
- Ams 6487 Assn Std Single Material Response
- Special Features [FEAT]
- Heat Treat Per Mil-H-6875 To 21850 Lbs Min Axial Load Strength
- Surface Finish [CSYM]
- 63.0 Microinches Overall
- Surface Treatment Document And Classification [STDC]
- Ams 2416 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Nickel Overall And Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 1.000 Inches Minimum Nut Thread And 1.020 Inches Maximum Nut Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread A
- Thread Quantity Per Inch [CMLP]
- 24 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
DLA Procurement Analysis 5307-01-203-4004
Management Data 5307-01-203-4004
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AI
- ADVANCED INTERCONTINENTAL BALLISTIC (MX)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-01-203-4004
Freight Information 5307-01-203-4004
5307-01-203-4004 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-203-4004 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-203-4004 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-203-4004 is not classified as a special type of cargo when transported by water. 5307-01-203-4004 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-01-203-4004 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: