Premium Information is available for this item - Upgrade for $1 a day
5307-01-179-3777
Shouldered Stud
5307011793777 011793777 9960M37P01
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
November 2023
6
Marketplace 5307-01-179-3777
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-179-3777 1+ Documents (More...)
United States (US) 4. 5307-01-179-3777 Marketplace Restrictions Approved Sources Datasheet Management
Quotation Updated Every Day 5307-01-179-3777 RQST NE Updated Every Day 5307-01-179-3777 RQST Updated
Restrictions 5307-01-179-3777
5307-01-179-3777 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-179-3777
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Apr 2007
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5307-01-179-3777
- Part Number
- Manufacturer
- Status
- 9960M37P01
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-179-3777
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 1.205 Inches Minimum First Hole And 1.225 Inches Maximum First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.066 Inches Minimum First Hole And 0.074 Inches Maximum First Hole
- Material [MATT]
- Nickel Alloy 718
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.250 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.304 Inches Minimum And 0.313 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.260 Inches Minimum And 0.270 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.428 Inches Minimum And 0.448 Inches Maximum
- Shoulder Length [AAVK]
- 0.060 Inches Minimum And 0.070 Inches Maximum
- Overall Length [ABHP]
- 2.205 Inches Nominal
- Style Designator [STYL]
- Shouldered
- Surface Finish [CSYM]
- 63.0 Microinches Shoulder Bearing Surface
- Surface Finish [CSYM]
- 32.0 Microinches Nut Thd
- Surface Finish [CSYM]
- 32.0 Microinches Stud Thd
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.740 Inches Minimum Stud Thread And 0.760 Inches Maximum Stud Thread
- Thread Length [AASA]
- 0.750 Inches Minimum Nut Thread And 0.810 Inches Maximum Nut Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Series Designator [THSD]
- Unjf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 28 Stud Thread
Weapon Systems (WSDC) 5307-01-179-3777
DLA Procurement Analysis 5307-01-179-3777
- Last Stock Position:
- 429 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-179-3777
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Jan 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Jan 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JF
- F-101 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5307-01-179-3777
Freight Information 5307-01-179-3777
5307-01-179-3777 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-179-3777 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-179-3777 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 575 for ocean manifesting and military sealift. 5307-01-179-3777 is not classified as a special type of cargo when transported by water. 5307-01-179-3777 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-179-3777
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-179-3777 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E318F0008
- 20 Oct 2017
- Subscribe
- 1000
- Subscribe
- Subscribe
- Subscribe
- SPE5EC17P0466
- 04 May 2017
- Subscribe
- 1000
- Subscribe
- Subscribe
- Subscribe
- SPE5E417CF009P00002
- 01 Nov 2016
- Subscribe
- 927
- Subscribe
- Subscribe
- Subscribe
- SPE5E416M2159
- 22 Jun 2016
- Subscribe
- 352
- Subscribe
- Subscribe
- Subscribe
- SPE5E416CF022P00001
- 03 Nov 2015
- Subscribe
- 319
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5307-01-179-3777 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: