Premium Information is available for this item - Upgrade for $1 a day
5307-01-178-7445
Shouldered Stud
5307011787445 011787445 5741166 14024229 14071080 5307PL0704202
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
Managed by United States
NSN Created on 9 May 1984
Data Last Changed
November 2023
November 2023
NATO Update Count
17
17
NATO Data Quality
Marketplace 5307-01-178-7445
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-178-7445 5+ Documents (More...)
01-148-6971 8 14 7X677 14066310 2815-01-166-0621 3 19 7X677 14071059 2590-01-147-4285 11 2 7X677 14071080
5307-01-178-7445 41 9 7X677 14077157 2815-01-148-3771 5 1 7X677 14077192 5306-01-149-9668 3 21 7X677
5307-01-178-7445 41 9 7X677 14077157 2815-01-148-3771 5 1 7X677 14077192 5306-01-149-9668 3 21 7X677
CROSS REFERENCE INDEXES PART NUMBER INDEX CAGE PART NUMBER STOCK NUMBER FIGURE NO ITEM NO 7X677 14071080
5307-01-178-7445 31 10 7X677 14077122 6620-01-146-8006 30 1 7X677 14079550 5330-00-107-3925 104 11 7X677
5307-01-178-7445 31 10 7X677 14077122 6620-01-146-8006 30 1 7X677 14079550 5330-00-107-3925 104 11 7X677
hmmwv/technical-manual TM-9-2815-237-34P HMMWV Engine Repair Parts And Special Tools Page 147 7X677 14071080
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 14077157 2815-01-148-3771 4 Restrictions
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 14077157 2815-01-148-3771 4 Restrictions
2815-01-246-5069 2 2 7X677 14071059 2590-01-147-4285 9 2 7X677 14071072 2815-01-265-7071 2 1 7X677 14071080
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 14077157 2815-01-148-3771 4 1 7X677
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 14077157 2815-01-148-3771 4 1 7X677
2815-01-246-5069 2 2 7X677 14071059 2590-01-147-4285 9 2 7X677 14071072 2815-01-265-7071 2 1 7X677 14071080
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 https//www.nsnlookup.com /equipment-intelligence
2815-01-246-5069 2 2 7X677 14071059 2590-01-147-4285 9 2 7X677 14071072 2815-01-265-7071 2 1 7X677 14071080
5307-01-178-7445 27 10 7X677 14077122 6620-01-146-8006 26 1 7X677 https//www.nsnlookup.com /equipment-intelligence
2815-01-246-5069 2 2 7X677 14071059 2590-01-147-4285 9 2 7X677 14071072 2815-01-265-7071 2 1 7X677 14071080
Restrictions 5307-01-178-7445
5307-01-178-7445 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-178-7445
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Lithuania (WI01)
- Effective Date:
- 1 Jul 2000
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Canada (ZC01)
- Effective Date:
- 1 Jun 2011
- Greece (ZU01)
- Effective Date:
- 1 Apr 2006
- Turkey (ZW01)
- Effective Date:
- 1 Mar 2005
Approved Sources 5307-01-178-7445
- Part Number
- Manufacturer
- Status
- 5741166
- Manufacturer
- 34623 - Am General Llc (Active)
- Primary Buy
- Primary Buy
- 14024229
- 11862 - General Motors Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 14071080
- 11862 - General Motors Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 14071080
- 7X677 - General Motors Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5307PL0704202
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
- 14024229
- 7X677 - General Motors Llc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5307-01-178-7445
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 14.7 Millimeters Minimum And 15.0 Millimeters Maximum
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 10.0 Millimeters Stud Thread
- Nominal Thread Size [CQJX]
- 10.0 Millimeters Nut Thread
- Nut End Shank Diameter [CTDT]
- 10.0 Millimeters Nominal
- Nut End Shank Length [ADDB]
- 63.6 Millimeters Nominal
- Material Document And Classification [MDCL]
- Gm 500-M 9.8 Fscm 11862 Mfr Ref Single Material Response
- Shoulder Length [AAVK]
- 6.17 Millimeters Minimum And 6.63 Millimeters Maximum
- Overall Length [ABHP]
- 118.63 Millimeters Nominal
- Thread Tolerance Class [CTTC]
- 6G External Nut Thread
- Thread Tolerance Class [CTTC]
- 6G External Stud Thread
- Style Designator [STYL]
- Shouldered
- Surface Treatment Document And Classification [STDC]
- Gm 4435-M Code A Fscm 11862 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Phosphate Overall
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 16.3 Millimeters Minimum Stud Thread And 17.0 Millimeters Maximum Stud Thread
- Thread Length [AASA]
- 25.0 Millimeters Minimum Nut Thread
- Thread Series Designator [THSD]
- M Nut Thread
- Thread Series Designator [THSD]
- M Stud Thread
- Thread Pitch In Millimeters [CQQR]
- 1.50 Nut Thread
- Thread Pitch In Millimeters [CQQR]
- 1.50 Stud Thread
Weapon Systems (WSDC) 5307-01-178-7445
DLA Procurement Analysis 5307-01-178-7445
- Last Stock Position:
- 311 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-178-7445
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- B
- Consumable Repair Parts
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5307-01-178-7445
5307-99-148-7525 5307-22-305-6616 5307-99-256-4270 5307-99-540-7533 5307-99-273-7955 5307-99-119-5482 5307-21-844-5013 5307-21-853-5274 5307-99-432-1068 5307-99-561-3927 5307-99-714-0931 5307-12-331-9281 5307-17-105-1402 5307-12-340-7169 5307-22-305-6617 5307-25-127-9401 5307-34-038-2247 5307-99-135-2600
Freight Information 5307-01-178-7445
5307-01-178-7445 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-178-7445 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-178-7445 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-178-7445 is not classified as a special type of cargo when transported by water. 5307-01-178-7445 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-178-7445
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 5
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-178-7445 15 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A624F2128
- 01 Nov 2023
- Subscribe
- 112
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F442A
- 17 Sep 2023
- Subscribe
- 195
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F442A
- 17 Sep 2023
- Subscribe
- 195
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F229E
- 16 Jun 2023
- Subscribe
- 133
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F229E
- 16 Jun 2023
- Subscribe
- 133
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F9288
- 16 Mar 2023
- Subscribe
- 205
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F9288
- 16 Mar 2023
- Subscribe
- 205
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F5734
- 13 Jan 2023
- Subscribe
- 154
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F5734
- 13 Jan 2023
- Subscribe
- 154
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F254V
- 15 Jul 2022
- Subscribe
- 264
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F254V
- 15 Jul 2022
- Subscribe
- 264
- Subscribe
- Subscribe
- Subscribe
- SPE4A622V363K
- 31 May 2022
- Subscribe
- 112
- Subscribe
- Subscribe
- Subscribe
- SPE4A522P6623
- 28 Apr 2022
- Subscribe
- 44
- Subscribe
- Subscribe
- Subscribe
- SPE4A621V703W
- 23 Aug 2021
- Subscribe
- 21
- Subscribe
- Subscribe
- Subscribe
- SPE5E414V7558
- 21 Apr 2014
- Subscribe
- 2041
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5307-01-178-7445 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: