Premium Information is available for this item - Upgrade for $1 a day
5307-01-176-8432
Locked In Stud
5307011768432 011768432 9117M42P01 SFC250SUM11 SUM-11
A headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED. View more Locked In Stud
November 2023
7
Marketplace 5307-01-176-8432
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-176-8432 5+ Documents (More...)
Restrictions 5307-01-176-8432
5307-01-176-8432 is a Locked In Stud that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-176-8432
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Apr 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5307-01-176-8432
- Part Number
- Manufacturer
- Status
- 9117M42P01
- Manufacturer
- 07482 - General Electric Company (Active)
- Source Control
- Source Control
- SFC250SUM11
- 83324 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- SUM-11
- 83324 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-176-8432
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Serrated Portion To End Of Stud Thread [ADCX]
- 0.140 Inches Nominal
- Distance From Serrated Portion To Nut End [ADCT]
- 0.563 Inches Minimum And 0.581 Inches Maximum
- Distance From Serrated Portion To Stud End [ADCU]
- 0.702 Inches Minimum And 0.752 Inches Maximum
- End Item Identification [AGAV]
- F-101 Engine
- Material [MATT]
- Steel Corrosion Resisting
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread0.250 Inches Stud Thread
- Locking Feature [AAUM]
- Ring, Lock Serrated
- Material Document And Classification [MDCL]
- Ams 5734 Assn Std Single Material Response
- Overall Length [ABHP]
- 1.263 Inches Minimum And 1.333 Inches Maximum
- Style Designator [STYL]
- Locked In
- Surface Finish [CSYM]
- 125.0 Microinches Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.493 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.375 Inches Nominal Stud Thread
- Thread Series Designator [THSD]
- Unjf Nut Threadunjc Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread20 Stud Thread
Weapon Systems (WSDC) 5307-01-176-8432
DLA Procurement Analysis 5307-01-176-8432
- Last Stock Position:
- 185 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-176-8432
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JF
- F-101 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-01-176-8432
Freight Information 5307-01-176-8432
5307-01-176-8432 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-176-8432 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-176-8432 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 575 for ocean manifesting and military sealift. 5307-01-176-8432 is not classified as a special type of cargo when transported by water. 5307-01-176-8432 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-176-8432
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-176-8432 1 Records
Contracting Technical Data File (CTDF) 5307-01-176-8432 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: