Premium Information is available for this item - Upgrade for $1 a day
5307-01-167-4590
Plain Stud
5307011674590 011674590 803-2178493-A-28 MIL-DTL-1222 QQ-N-286 GR500 1/2-13UNC-3A X 2 3/8TYIVCLASS 1/2-13UNC-3A X 2 3/8TYIVCLASSL1 MIL-DTL-1222 QQ-N-286 GR500L1 803-2178493-A-28L1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
May 2023
5
Marketplace 5307-01-167-4590
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-167-4590 5+ Documents (More...)
MIL-DTL-1222 QQ-N-286 GR500L1 803-2178493-A-28L1 A headless fastener not exceeding 12 inches (304.8
Day 5307-01-167-4590 RQST Updated Every Day 5307-01-167-4590 RQST NE Related Documents 5307-01-167-4590
845-6602371 845-6602371 PIECE 65 2 1/4-8UN-3A X 9 1/8 TYIVL1 MIL-DTL-1222 QQ-N-286 GR500L1
1/2-13UNC-3A X 2 3/8TYIVCLASSL1 MIL-DTL-1222 QQ-N-286 GR500L1 845-6602371 PIECE 65 2 1
MIL-DTL-1222 QQ-N-286 GR500L1 1 3/4-5UNC-3A X 10 3/4 TYIVL1 203-4678531 ITEM 7L1 A headless
5UNC-3A X 10 3/4 TYIVMIL-DTL-1222 QQ-N-286 GR500 https//www.nsnlookup.com /fsg-53/fsc-5307/us 5307-01-167-4590
Plain Stud 5307011674590 011674590 Upgrade for $1 a day Upgrade your Account Upgrade 5307-01-167
-4590Plain Stud5307011674590 011674590 803-2178493 GR500 1/2-13UNC-3A X 2 3/8TYIVCLASS 1/2-13UNC-3A X
/4-8UN-3A X 9 1/8 TYIVL1 MIL-DTL-1222 QQ-N-286 GR500L1 845-6602371 https//www.nsnlookup.com /fsg-53/fsc
Continuous Thread Stud 5307011909682 845-6602371 PIECE 65 2 1/4-8UN-3A X 9 1/8 TYIVL1 MIL-DTL-1222 QQ-N-286 GR500L1
Restrictions 5307-01-167-4590
IUID Required
5307-01-167-4590 is a Plain Stud that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-167-4590
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5307-01-167-4590
- Part Number
- Manufacturer
- Status
- 803-2178493-A-28
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- MIL-DTL-1222 QQ-N-286 GR500
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 1/2-13UNC-3A X 2 3/8TYIVCLASS
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 1/2-13UNC-3A X 2 3/8TYIVCLASSL1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-DTL-1222 QQ-N-286 GR500L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 803-2178493-A-28L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5307-01-167-4590
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
DLA Procurement Analysis 5307-01-167-4590
Management Data 5307-01-167-4590
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5307-01-167-4590
Freight Information 5307-01-167-4590
5307-01-167-4590 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 051080. A Sub NMFC of Z. It has a NMFC Description of FAUCETS,BIBCOCKS,GATES VALVES. 5307-01-167-4590 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5307-01-167-4590 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 29300 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 5307-01-167-4590 is not classified as a special type of cargo when transported by water. 5307-01-167-4590 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-167-4590
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 5.0" H x 3.0" W x 1.5" L
- --
- --
- --
- Any Suitable Process
- 5.0" H x 3.0" W x 1.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 12
- No Requirement