Premium Information is available for this item - Upgrade for $1 a day
5307-01-151-4161
Shouldered And Stepped Stud
5307011514161 011514161 14033887
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
June 2023
3
Marketplace 5307-01-151-4161
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-151-4161 1+ Documents (More...)
Restrictions 5307-01-151-4161
5307-01-151-4161 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-151-4161
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5307-01-151-4161
- Part Number
- Manufacturer
- Status
- 14033887
- Manufacturer
- 7X677 - General Motors Llc (Active)
- Primary Buy
- Primary Buy
- 14033887
- 11862 - General Motors Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-151-4161
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 12.73 Millimeters Minimum And 13.00 Millimeters Maximum
- Material Document And Classification [MDCL]
- Sae Assn Std All Material Responses
- Material [MATT]
- Steel Comp 1005 Or Steel Comp 1008 Or Steel Comp 1012 Or Steel Comp 1015 Or Steel Comp 1017 Or Steel Comp 1019 Or Steel Comp 1020 Or Steel Comp 1022 Or Steel Comp 1025 Or Steel Comp 1029 Or Steel Comp 1031 Or Steel Comp 1035 Or Steel Comp 1039 Or Steel Comp 1040 Or Steel Comp 1044 Or Steel Comp 1050 Or Steel Comp 1055 Or Steel Comp 1066 Or Steel Comp 1070 Or Steel Comp 1080 Or Steel Comp 1085 Or Steel Comp 1090 Or Steel Comp 1114 Or Steel Comp 1120 Or Steel Comp 1125 Or Steel Comp 1132 Or Steel Comp 1140 Or Steel Comp 1151 Or Steel Comp 1211
- Nominal Thread Size [CQJX]
- 6.0 Millimeters Nut Thread
- Nominal Thread Size [CQJX]
- 8.0 Millimeters Stud Thread
- Nut End Shank Diameter [CTDT]
- 6.0 Millimeters Nominal
- Nut End Shank Length [ADDB]
- 48.7 Millimeters Nominal
- Shoulder Length [AAVK]
- 5.1 Millimeters Minimum And 5.5 Millimeters Maximum
- Overall Length [ABHP]
- 100.0 Millimeters Nominal
- Thread Tolerance Class [CTTC]
- 6G External Nut Thread
- Thread Tolerance Class [CTTC]
- 6G External Stud Thread
- Stud End Shank Length [CSJZ]
- 5.0 Millimeters Nominal
- Stud End Shank Diameter [CSXH]
- 8.0 Millimeters Nominal
- Style Designator [STYL]
- Shouldered And Stepped
- Surface Treatment Document And Classification [STDC]
- Gm 6174-M Fscm 11862 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Phosphate Overall
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 17.0 Millimeters Minimum Stud Thread
- Thread Length [AASA]
- 24.0 Millimeters Nominal Nut Thread
- Thread Series Designator [THSD]
- M Nut Thread
- Thread Series Designator [THSD]
- M Stud Thread
- Thread Pitch In Millimeters [CQQR]
- 1.00 Nut Thread
- Thread Pitch In Millimeters [CQQR]
- 1.25 Stud Thread
DLA Procurement Analysis 5307-01-151-4161
Management Data 5307-01-151-4161
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-01-151-4161
Freight Information 5307-01-151-4161
5307-01-151-4161 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-151-4161 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-151-4161 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-151-4161 is not classified as a special type of cargo when transported by water. 5307-01-151-4161 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-151-4161
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-151-4161 1 Records
Contracting Technical Data File (CTDF) 5307-01-151-4161 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: