Premium Information is available for this item - Upgrade for $1 a day
5307-01-100-0449
Shouldered And Stepped Stud
5307011000449 011000449 12271209
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
November 2023
8
Marketplace 5307-01-100-0449
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-100-0449 1+ Documents (More...)
Restrictions 5307-01-100-0449
5307-01-100-0449 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5307-01-100-0449
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5307-01-100-0449
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
Approved Sources 5307-01-100-0449
- Part Number
- Manufacturer
- Status
- 12271209
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-100-0449
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 0.308 Inches Nominal
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum And 41.0 Rockwell C Maximum
- Material [MATT]
- Steel Corrosion Resisting
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nut End Shank Diameter [CTDT]
- 0.180 Inches Minimum And 0.200 Inches Maximum
- Nut End Shank Length [ADDB]
- 0.050 Inches Minimum And 0.070 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5773 Assn Std Single Material Response Or Ams 5763 Assn Std Single Material Response
- Shoulder Length [AAVK]
- 0.150 Inches Minimum And 0.170 Inches Maximum
- Overall Length [ABHP]
- 1.550 Inches Minimum And 1.580 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Stud,Hex-Cylinder
- Special Features [FEAT]
- Stud End Threads Are 0.3125-24 Unjf, Class 3A
- Stud End Shank Diameter [CSXH]
- 0.250 Inches Minimum And 0.270 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.050 Inches Minimum And 0.070 Inches Maximum
- Style Designator [STYL]
- Shouldered And Stepped
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.360 Inches Minimum Nut Thread And 0.390 Inches Maximum Nut Thread
- Thread Length [AASA]
- 0.910 Inches Nominal Stud Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
Weapon Systems (WSDC) 5307-01-100-0449
DLA Procurement Analysis 5307-01-100-0449
- Last Stock Position:
- 172 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-100-0449
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5307-01-100-0449
Freight Information 5307-01-100-0449
5307-01-100-0449 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5307-01-100-0449 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5307-01-100-0449 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5307-01-100-0449 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-01-100-0449 is not classified as a special type of cargo when transported by water. 5307-01-100-0449 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-100-0449
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-01-100-0449 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: