Premium Information is available for this item - Upgrade for $1 a day
5307-01-045-8440
Plain Stud
5307010458440 010458440 UH1491
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. View more Plain Stud
January 2023
8
Marketplace 5307-01-045-8440
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-045-8440 1+ Documents (More...)
Restrictions 5307-01-045-8440
5307-01-045-8440 is a Plain Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-01-045-8440
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5307-01-045-8440
- Part Number
- Manufacturer
- Status
- UH1491
- Manufacturer
- 12736 - Clayton Manufacturing Co (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-01-045-8440
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Hardness Rating [CQFM]
- 35.0 Rockwell C Minimum And 40.0 Rockwell C Maximum
- Material Document And Classification [MDCL]
- Sae Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 4142
- Nominal Thread Size [CQJX]
- 0.500 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.500 Inches Stud Thread
- Overall Length [ABHP]
- 4.750 Inches Nominal
- Surface Treatment [SFTT]
- Cadmium Overall Or Zinc Overall
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.470 Inches Minimum Stud Thread And 0.500 Inches Maximum Stud Thread
- Thread Length [AASA]
- 0.880 Inches Minimum Nut Thread And 1.000 Inches Maximum Nut Thread
- Thread Quantity Per Inch [CMLP]
- 13 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 13 Stud Thread
- Thread Series Designator [THSD]
- Unc Nut Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
NATO Stock Numbers Related to 5307-01-045-8440
Freight Information 5307-01-045-8440
5307-01-045-8440 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-045-8440 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-045-8440 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-045-8440 is not classified as a special type of cargo when transported by water. 5307-01-045-8440 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-045-8440
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box