Premium Information is available for this item - Upgrade for $1 a day
5307-01-028-8531
Recessed Stud
5307010288531 010288531 299C626P15 299C626P8
A headless fastener not exceeding twelve inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. One end or both ends may have a point. The unthreaded section may have more than one diameter, none of which may be greater than the maximum major thread diameter. It may be thread relieved. Excludes items with taper threads. View more Recessed Stud
November 2023
17
Marketplace 5307-01-028-8531
Request a Quotation from participating marketplace vendors
Related Documents 5307-01-028-8531 1+ Documents (More...)
United States (US) 4. 5307-01-028-8531 Marketplace Restrictions Approved Sources Datasheet Management
STUD,RECESSED 10 EA NS Request Quotation Subscribe to View Vendor Details... 299C626P8 STUD 11 EA NS
Restrictions 5307-01-028-8531
5307-01-028-8531 is a Recessed Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-01-028-8531
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Mar 1995
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5307-01-028-8531
- Part Number
- Manufacturer
- Status
- 299C626P15
- Manufacturer
- 99207 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 299C626P15
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 299C626P8
- 99207 - General Electric Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-01-028-8531
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Diameter Of Recessed Portion Of Shank [ADDA]
- 0.167 Inches Minimum And 0.173 Inches Maximum
- Hardness Rating [CQFM]
- 38.0 Rockwell C Minimum And 42.0 Rockwell C Maximum
- Nominal Thread Size [CQJX]
- 0.190 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.190 Inches Stud Thread
- Length Of Recessed Portion Of Shank [ADCZ]
- 0.137 Inches Minimum
- Overall Length [ABHP]
- 1.120 Inches Minimum And 1.150 Inches Maximum
- Special Features [FEAT]
- Lock Thds On Stud End
- Style Designator [STYL]
- Recessed
- Surface Finish [CSYM]
- 125.0 Microinches Body
- Surface Finish [CSYM]
- 125.0 Microinches Shank
- Surface Finish [CSYM]
- 63.0 Microinches Nut Thd
- Surface Finish [CSYM]
- 63.0 Microinches Stud Thd
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.410 Inches Minimum Stud Thread And 0.440 Inches Maximum Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
Weapon Systems (WSDC) 5307-01-028-8531
DLA Procurement Analysis 5307-01-028-8531
- Last Stock Position:
- 19 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5307-01-028-8531
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5307-01-028-8531
Freight Information 5307-01-028-8531
5307-01-028-8531 has freight characteristics managed by Australia.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-01-028-8531 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-01-028-8531 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-01-028-8531 is not classified as a special type of cargo when transported by water. 5307-01-028-8531 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-01-028-8531
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 10
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5307-01-028-8531 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E416V6427
- 05 May 2016
- Subscribe
- 337
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V0571
- 16 Oct 2015
- Subscribe
- 19
- Subscribe
- Subscribe
- Subscribe
- SPE5E414M2378
- 09 Sep 2014
- Subscribe
- 33
- Subscribe
- Subscribe
- Subscribe
- SPE5E414M2143
- 14 Aug 2014
- Subscribe
- 32
- Subscribe
- Subscribe
- Subscribe
- SPE5E914M0178
- 26 Dec 2013
- Subscribe
- 58
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5307-01-028-8531 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: