Premium Information is available for this item - Upgrade for $1 a day
5307-00-967-8172
Recessed Stud
5307009678172 009678172 33035P12
A headless fastener not exceeding twelve inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. One end or both ends may have a point. The unthreaded section may have more than one diameter, none of which may be greater than the maximum major thread diameter. It may be thread relieved. Excludes items with taper threads. View more Recessed Stud
January 2023
10
Marketplace 5307-00-967-8172
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-967-8172 1+ Documents (More...)
5307-00-967-8172 RQST Updated Every Day 5307-00-967-8172 RQST NE Related Documents 5307-00-967-8172
NE Updated Every Day 5307-00-967-8172 RQST Updated Every Day 5307-00-967-8172 RQST NE Restrictions 5307
Restrictions 5307-00-967-8172
5307-00-967-8172 is a Recessed Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-967-8172
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5307-00-967-8172
- Part Number
- Manufacturer
- Status
- 33035P12
- Manufacturer
- 00198 - Pratt & Whitney Canada Corp (Active)
- Primary Buy
- Primary Buy
- 33035P12
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-00-967-8172
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.084 Inches Minimum And 0.104 Inches Maximum First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.078 Inches Nominal First Hole
- Diameter Of Recessed Portion Of Shank [ADDA]
- 0.189 Inches Minimum And 0.199 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 32.0 Rockwell C Maximum
- Material [MATT]
- Steel Comp 8740
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.250 Inches Stud Thread
- Length Of Recessed Portion Of Shank [ADCZ]
- 4.906 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 7456 Assn Std Single Material Response
- Overall Length [ABHP]
- 5.896 Inches Minimum And 5.916 Inches Maximum
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.490 Inches Minimum Nut Thread And 0.510 Inches Maximum Nut Thread
- Thread Length [AASA]
- 0.490 Inches Minimum Stud Thread And 0.510 Inches Maximum Stud Thread
- Thread Pitch Diameters [AAJE]
- +0.2339/+0.2363 Inches Stud Thread
- Thread Quantity Per Inch [CMLP]
- 20 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Uns Stud Thread
- Style Designator [STYL]
- Recessed
- Surface Finish [CSYM]
- 32.0 Microinches Nut Thd
- Surface Finish [CSYM]
- 32.0 Microinches Stud Thd
- Surface Finish [CSYM]
- 63.0 Microinches Shank
- Surface Treatment Document And Classification [STDC]
- Ams 2400 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
Similar Supply Items to 5307-00-967-8172
Freight Information 5307-00-967-8172
5307-00-967-8172 has freight characteristics.. 5307-00-967-8172 has a variance between NMFC and UFC when transported by rail and the description should be consulted.