Premium Information is available for this item - Upgrade for $1 a day
5307-00-939-2229
Shouldered And Stepped Stud
5307009392229 009392229 5108863 510863
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
May 2023
12
Marketplace 5307-00-939-2229
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-939-2229 5+ Documents (More...)
Restrictions 5307-00-939-2229
5307-00-939-2229 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-00-939-2229
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5307-00-939-2229
- Part Number
- Manufacturer
- Status
- 510863
- Manufacturer
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Original Design
- Original Design
- 510863
- 02991 - Thompson Aerospace, Llc (Active)
- Secondary Buy
- Secondary Buy
- 5108863
- 55213 - Aircraft Components And Fasteners (Active)
- Secondary Buy
- Secondary Buy
- 510863
- 56055 - Precision Speed Manufacturing, Llc (Active)
- Secondary Buy
- Secondary Buy
- 510863
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-00-939-2229
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.110 Inches Nominal First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.070 Inches Nominal First Hole
- Distance Across Flats [AWTQ]
- 0.430 Inches Minimum And 0.439 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 32.0 Rockwell C Maximum
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.312 Inches Stud Thread
- Nut End Shank Length [ADDB]
- 0.595 Inches Minimum And 0.610 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 7456 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.495 Inches Minimum And 0.505 Inches Maximum
- Shoulder Length [AAVK]
- 0.060 Inches Minimum And 0.065 Inches Maximum
- Overall Length [ABHP]
- 1.615 Inches Nominal
- Stud End Shank Diameter [CSXH]
- 0.374 Inches Nominal
- Style Designator [STYL]
- Shouldered And Stepped
- Surface Treatment Document And Classification [STDC]
- Ams 2400 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.325 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.625 Inches Nominal Stud Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
DLA Procurement Analysis 5307-00-939-2229
Management Data 5307-00-939-2229
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PQ
- PRATT & WHITNEY ENGINES AND COMPONENTS, TF-30
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-939-2229
Freight Information 5307-00-939-2229
5307-00-939-2229 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-939-2229 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-939-2229 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-939-2229 is not classified as a special type of cargo when transported by water. 5307-00-939-2229 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-939-2229 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: