Premium Information is available for this item - Upgrade for $1 a day
5307-00-930-7616
Shouldered And Stepped Stud
5307009307616 009307616 64474-501-1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
May 2023
4
Marketplace 5307-00-930-7616
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-930-7616 1+ Documents (More...)
Restrictions 5307-00-930-7616
5307-00-930-7616 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5307-00-930-7616
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5307-00-930-7616
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FUKZ
Approved Sources 5307-00-930-7616
- Part Number
- Manufacturer
- Status
- 64474-501-1
- Manufacturer
- 94756 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-930-7616
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 0.225 Inches Minimum And 0.235 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-763,Cond B Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303Se
- Nominal Thread Size [CQJX]
- 0.138 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.120 Inches Minimum And 0.127 Inches Maximum
- Nut End Shank Length [ADDB]
- 2.730 Inches Nominal
- Shoulder Diameter [AAVH]
- 0.312 Inches Nominal
- Shoulder Length [AAVK]
- 0.120 Inches Nominal
- Overall Length [ABHP]
- 3.775 Inches Nominal
- Special Features [FEAT]
- Second Shoulder 0.260 In. Dia And0.100 In. Wide Located 2.970 In. From Nut End,Shank Dia Between Shoulders Is 0.150 In.
- Stud End Shank Diameter [CSXH]
- 0.136 Inches Minimum And 0.138 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.105 Inches Nominal
- Style Designator [STYL]
- Shouldered And Stepped
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Class [AAJD]
- 2A Stud Thread
- Thread Length [AASA]
- 0.220 Inches Nominal Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.600 Inches Nominal Nut Thread
- Thread Quantity Per Inch [CMLP]
- 32 Stud Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
Weapon Systems (WSDC) 5307-00-930-7616
DLA Procurement Analysis 5307-00-930-7616
Management Data 5307-00-930-7616
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AH
- LGM-30 MINUTEMAN
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-930-7616
Freight Information 5307-00-930-7616
5307-00-930-7616 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-930-7616 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-930-7616 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-930-7616 is not classified as a special type of cargo when transported by water. 5307-00-930-7616 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-930-7616 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: