Premium Information is available for this item - Upgrade for $1 a day
5307-00-929-0952
Shouldered Stud
5307009290952 009290952 209-001-311-1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
4
Marketplace 5307-00-929-0952
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-929-0952 1+ Documents (More...)
STUD,SHOULDERED 9 EA NS Request Quotation Subscribe to View Vendor Details... 209-001-311-1 STUD
,SHOULDERED 6 EA NS Request Quotation Updated Every Day 5307-00-929-0952 RQST NE Updated Every Day 5307
Restrictions 5307-00-929-0952
5307-00-929-0952 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-929-0952
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BD
- Israel (YD01)
- Effective Date:
- 1 Mar 2017
Approved Sources 5307-00-929-0952
- Part Number
- Manufacturer
- Status
- 209-001-311-1
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-929-0952
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 0.562 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-5626,Cond C4 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 4140
- Nominal Thread Size [CQJX]
- 0.312 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.312 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.308 Inches Minimum And 0.312 Inches Maximum
- Nut End Shank Length [ADDB]
- 2.470 Inches Minimum And 2.500 Inches Maximum
- Shoulder Length [AAVK]
- 0.183 Inches Minimum And 0.187 Inches Maximum
- Overall Length [ABHP]
- 3.980 Inches Nominal
- Stud End Shank Diameter [CSXH]
- 0.308 Inches Minimum And 0.312 Inches Maximum
- Stud End Shank Length [CSJZ]
- 0.253 Inches Minimum And 0.257 Inches Maximum
- Style Designator [STYL]
- Shouldered
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.520 Inches Nominal Stud Thread
- Thread Length [AASA]
- 0.520 Inches Minimum Nut Thread And 0.550 Inches Maximum Nut Thread
- Thread Series Designator [THSD]
- Unjf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
DLA Procurement Analysis 5307-00-929-0952
Management Data 5307-00-929-0952
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5307-00-929-0952
Freight Information 5307-00-929-0952
5307-00-929-0952 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-929-0952 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-929-0952 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-929-0952 is not classified as a special type of cargo when transported by water. 5307-00-929-0952 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-00-929-0952
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-00-929-0952 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: