5307-00-920-7770

(CAGE Code 82796) | DAC: E 29 Mar 1988 5307-00-920-7770 Plain Stud 21-62RNCC: 3 | RNVC: 2 | DAC: X 1

5925-01-643-7771 5925016437771 016437771 is a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.

5905-00-009-6924 5905000096924 000096924 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. excludes suppressor, ignition interference.

7610-17-054-4131 7610170544131 170544131 is two or more sheets, written or printed,or stored on electonic media, containing no programs or software, outlining maintenance, installation and/or operating information applicable to one or more related pieces of equipment. it may have a cover. the sheets may be fastened by staple(s), loosely folded, and/or punched for loose-leaf binding. see also book. for single sheet items, see chart (as modified) and sheet, technical.

5925-01-368-1120 5925013681120 013681120 is a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.