Premium Information is available for this item - Upgrade for $1 a day
5307-00-917-1895
Shouldered Stud
5307009171895 009171895 209-001-310-1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
3
Marketplace 5307-00-917-1895
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-917-1895 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5307-00-917-1895 RQST NE Updated Every Day 5307-00-917-1895 RQST
Updated Every Day 5307-00-917-1895 RQST NE Related Documents 5307-00-917-1895 1+ Documents ( More...
Restrictions 5307-00-917-1895
5307-00-917-1895 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-00-917-1895
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
Approved Sources 5307-00-917-1895
- Part Number
- Manufacturer
- Status
- 209-001-310-1
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-917-1895
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Material Document And Classification [MDCL]
- Mil-S-5626 Condition 4 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 4140
- Nominal Thread Size [CQJX]
- 0.520 Inches Nut Thread0.375 Inches Stud Thread
- Overall Length [ABHP]
- 3.980 Inches Nominal
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Threadright-Hand Stud Thread
- Thread Length [AASA]
- 0.460 Inches Nominal Nut Thread0.605 Inches Nominal Stud Thread
- Thread Series Designator [THSD]
- Unjf Nut Threadunjf Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
DLA Procurement Analysis 5307-00-917-1895
Management Data 5307-00-917-1895
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5307-00-917-1895
Freight Information 5307-00-917-1895
5307-00-917-1895 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-917-1895 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-917-1895 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-917-1895 is not classified as a special type of cargo when transported by water. 5307-00-917-1895 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-917-1895 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: