Premium Information is available for this item - Upgrade for $1 a day
5307-00-883-1910
Shouldered And Stepped Stud
5307008831910 008831910 6823167P003
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
May 2023
19
Marketplace 5307-00-883-1910
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5307-00-883-1910 1+ Documents (More...)
Restrictions 5307-00-883-1910
5307-00-883-1910 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains Silver.
End Users 5307-00-883-1910
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Brazil (YA01)
- Effective Date:
- 1 Jan 2017
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
Approved Sources 5307-00-883-1910
- Part Number
- Manufacturer
- Status
- 6823167P003
- Manufacturer
- 63005 - Rolls-Royce Corporation (Active)
- Primary Buy
- Primary Buy
- 6823167P003
- 24617 - General Motors Corp (Active)
- Secondary Buy
- Secondary Buy
- 6823167P003
- 73342 - Allison Transmission Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-00-883-1910
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance Across Flats [AWTQ]
- 0.688 Inches Nominal
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.3125 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.250 Inches Nominal
- Nut End Shank Length [ADDB]
- 0.041 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 0.800 Inches Nominal
- Shoulder Length [AAVK]
- 0.062 Inches Nominal
- Overall Length [ABHP]
- 1.060 Inches Nominal
- Stud End Shank Diameter [CSXH]
- 0.312 Inches Nominal
- Style Designator [STYL]
- Shouldered And Stepped
- Surface Treatment [SFTT]
- Silver Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Length [AASA]
- 0.198 Inches Nominal Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.717 Inches Nominal Nut Thread
- Thread Pitch Diameters [AAJE]
- +0.2917/+0.2927 Inches Stud Thread
- Thread Series Designator [THSD]
- Uns Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
Weapon Systems (WSDC) 5307-00-883-1910
DLA Procurement Analysis 5307-00-883-1910
Management Data 5307-00-883-1910
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- OJ
- ALLISON JET ENGINES & COMPONENTS, T-56
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-883-1910
Freight Information 5307-00-883-1910
5307-00-883-1910 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-883-1910 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-883-1910 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-883-1910 is not classified as a special type of cargo when transported by water. 5307-00-883-1910 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-883-1910 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: