Premium Information is available for this item - Upgrade for $1 a day
5307-00-798-7642
Shouldered Stud
5307007987642 007987642 706B202P1
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
10
Marketplace 5307-00-798-7642
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-798-7642 1+ Documents (More...)
Request a Quotation from participating marketplace vendors Request Updated Every Day 5307-00-798-7642
RQST NE Updated Every Day 5307-00-798-7642 RQST Updated Every Day 5307-00-798-7642 RQST NE Related Documents
Restrictions 5307-00-798-7642
5307-00-798-7642 is a Shouldered Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-798-7642
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5307-00-798-7642
- Part Number
- Manufacturer
- Status
- 706B202P1
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 706B202P1
- 24446 - General Electric Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5307-00-798-7642
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.100 Inches Minimum First Hole And 0.140 Inches Maximum First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.125 Inches Nominal First Hole
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.625 Inches Nut Thread
- Nut End Shank Diameter [CTDT]
- 0.625 Inches Nominal
- Nut End Shank Length [ADDB]
- 0.120 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 5062 Assn Std Single Material Response
- Shoulder Diameter [AAVH]
- 1.000 Inches Nominal
- Shoulder Length [AAVK]
- 1.160 Nominal Mils And 1.190 Nominal Centimeters
- Style Designator [STYL]
- Shouldered
- Thread Class [AAJD]
- 2A Nut Thread
- Thread Class [AAJD]
- 2A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 1.010 Inches Minimum Nut Thread And 1.280 Inches Maximum Nut Thread
- Thread Length [AASA]
- 1.060 Inches Minimum Stud Thread And 1.180 Inches Maximum Stud Thread
- Thread Series Designator [THSD]
- Unc Nut Thread
- Thread Quantity Per Inch [CMLP]
- 11 Nut Thread
DLA Procurement Analysis 5307-00-798-7642
Management Data 5307-00-798-7642
Similar Supply Items to 5307-00-798-7642
Freight Information 5307-00-798-7642
5307-00-798-7642 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5307-00-798-7642 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5307-00-798-7642 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-798-7642 is not classified as a special type of cargo when transported by water. 5307-00-798-7642 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5307-00-798-7642
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5307-00-798-7642 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: