5307-00-335-7479

Documents 6210-01-010-6917 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5307/us 5307-00-335-7479
Recessed And Stepped Stud 5307003357479 5307-00-335-7479 5307003357479 003357479 is a headless

2 | DAC: 6 12 Sep 1969 5330-00-350-2943 Gasket 2208Y77RNCC: 5 | RNVC: 9 | DAC: X 1 Jan 1963 5307-00-335-7479

5310-12-143-5959 5310121435959 121435959 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

in your web browser . 5315-12-134-8867Spring Pin5315121348867 121348867 LG20X28-B3A 1000610-0015 LG-20X28
1000610-0015 D4253 - Faun-Werke - Werk Butzbach - (Replaced) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 LG-20X28

5365-12-177-5674 5365121775674 121775674 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.