Premium Information is available for this item - Upgrade for $1 a day
5307-00-248-9460
Locked In Stud
5307002489460 002489460 KNNS624JF-14 42132D213 KNNS624F14 42132-213
A headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED. View more Locked In Stud
May 2023
4
Marketplace 5307-00-248-9460
Request a Quotation from participating marketplace vendors
Restrictions 5307-00-248-9460
5307-00-248-9460 is a Locked In Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-248-9460
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5307-00-248-9460
- Part Number
- Manufacturer
- Status
- KNNS624JF-14
- Manufacturer
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Primary Buy
- Primary Buy
- 42132D213
- 82402 - Triumph Gear Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- KNNS624F14
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 42132-213
- 00462 - Goodrich Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-00-248-9460
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.172 Inches Nominal First Hole
- Distance From Shoulder Portion To Nut End [ADCV]
- 0.875 Inches Nominal
- Cotter Pin Hole Diameter [ADDV]
- 0.106 Inches Nominal First Hole
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.312 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.500 Inches Stud Thread
- Locking Feature [AAUM]
- Key Inserts
- Overall Length [ABHP]
- 1.375 Inches Nominal
- Style Designator [STYL]
- Locked In
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 2A Stud Thread
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.500 Inches Nominal Stud Thread
- Thread Length [AASA]
- 0.640 Inches Nominal Nut Thread
- Thread Quantity Per Inch [CMLP]
- 13 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 24 Nut Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread
DLA Procurement Analysis 5307-00-248-9460
Management Data 5307-00-248-9460
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-248-9460
Freight Information 5307-00-248-9460
5307-00-248-9460 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-248-9460 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-248-9460 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5307-00-248-9460 is not classified as a special type of cargo when transported by water. 5307-00-248-9460 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-248-9460 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: