Premium Information is available for this item - Upgrade for $1 a day
5307-00-215-9733
Locked In Stud
5307002159733 002159733 108296P5 108296P005
A headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED. View more Locked In Stud
May 2023
2
Marketplace 5307-00-215-9733
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-215-9733 1+ Documents (More...)
Locked In Stud 5307002159733 002159733 5307-00-215-9733 5307002159733 002159733 is a headless fastener
Restrictions 5307-00-215-9733
5307-00-215-9733 is a Locked In Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-215-9733
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
Approved Sources 5307-00-215-9733
- Part Number
- Manufacturer
- Status
- 108296P5
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 108296P005
- 00198 - Pratt & Whitney Canada Cie (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5307-00-215-9733
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.115 Inches Minimum First Hole And 0.135 Inches Maximum First Hole
- Distance From Serrated Portion To End Of Stud Thread [ADCX]
- 0.430 Inches Minimum And 0.500 Inches Maximum
- Distance From Serrated Portion To Nut End [ADCT]
- 1.475 Inches Minimum And 1.525 Inches Maximum
- Distance From Serrated Portion To Stud End [ADCU]
- 1.270 Inches Minimum And 1.320 Inches Maximum
- Cotter Pin Hole Diameter [ADDV]
- 0.094 Inches Minimum First Hole And 0.101 Inches Maximum First Hole
- Material [MATT]
- Steel Comp 8740
- Nominal Thread Size [CQJX]
- 0.438 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.438 Inches Stud Thread
- Locking Feature [AAUM]
- Ring, Lock Serrated
- Material Document And Classification [MDCL]
- Ams6322 Assn Std Single Material Response
- Serration Quantity [ADDW]
- 46
- Overall Length [ABHP]
- 2.795 Inches Nominal
- Special Features [FEAT]
- Nurl 0.4485 In Min 0.452 5 In Max Dia
- Style Designator [STYL]
- Locked In
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.611 Inches Minimum Nut Thread And 0.651 Inches Maximum Nut Thread
- Thread Length [AASA]
- 0.651 Inches Minimum Stud Thread And 0.836 Inches Maximum Stud Thread
- Thread Quantity Per Inch [CMLP]
- 20 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 20 Stud Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
DLA Procurement Analysis 5307-00-215-9733
Management Data 5307-00-215-9733
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5307-00-215-9733
Freight Information 5307-00-215-9733
5307-00-215-9733 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-215-9733 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-215-9733 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-215-9733 is not classified as a special type of cargo when transported by water. 5307-00-215-9733 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-215-9733 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: