Premium Information is available for this item - Upgrade for $1 a day
5307-00-174-8501
Shouldered Stud
5307001748501 001748501 4027T42P01
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN. View more Shouldered Stud
May 2023
2
Marketplace 5307-00-174-8501
Request a Quotation from participating marketplace vendors
Restrictions 5307-00-174-8501
5307-00-174-8501 is a Shouldered Stud that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-174-8501
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
Approved Sources 5307-00-174-8501
- Part Number
- Manufacturer
- Status
- 4027T42P01
- Manufacturer
- 99207 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-174-8501
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Criticality Code Justification [CRTL]
- Ctdt
- Distance Across Flats [AWTQ]
- 0.330 Inches Minimum And 0.340 Inches Maximum
- Material [MATT]
- Nickel Alloy
- Nominal Thread Size [CQJX]
- 0.190 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.190 Inches Stud Thread
- Nut End Shank Diameter [CTDT]
- 0.190 Inches Nominal
- Nut End Shank Length [ADDB]
- 0.130 Inches Minimum And 0.150 Inches Maximum
- Material Document And Classification [MDCL]
- C50tf25 Cl A,Fscm 24446 Mfr Ref Single Material Response
- Shoulder Diameter [AAVH]
- 0.480 Inches Minimum And 0.485 Inches Maximum
- Shoulder Length [AAVK]
- 0.070 Inches Minimum And 0.080 Inches Maximum
- Overall Length [ABHP]
- 1.020 Inches Minimum And 1.120 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 32 Nut Thread
- Thread Quantity Per Inch [CMLP]
- 32 Stud Thread
- Thread Series Designator [THSD]
- Unjf Nut Thread
- Thread Series Designator [THSD]
- Unjf Stud Thread
- Stud End Shank Diameter [CSXH]
- 0.190 Inches Nominal
- Stud End Shank Length [CSJZ]
- 0.135 Inches Nominal
- Style Designator [STYL]
- Shouldered
- Surface Finish [CSYM]
- 32.0 Microinches Shank
- Surface Finish [CSYM]
- 63.0 Microinches Nut Thd
- Surface Finish [CSYM]
- 63.0 Microinches Wrenching Facility
- Surface Finish [CSYM]
- 63.0 Microinches Stud Thd
- Test Data Document [TEST]
- 99207-+3Tf2 Cl A Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.335 Inches Minimum Stud Thread And 0.355 Inches Maximum Stud Thread
- Thread Length [AASA]
- 0.365 Inches Minimum Nut Thread And 0.385 Inches Maximum Nut Thread
Weapon Systems (WSDC) 5307-00-174-8501
DLA Procurement Analysis 5307-00-174-8501
Management Data 5307-00-174-8501
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-00-174-8501
Freight Information 5307-00-174-8501
5307-00-174-8501 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 139820. A Sub NMFC of X. It has a NMFC Description of NICKEL BOLTS/NAILS/NUTS/RIVETS ETC. 5307-00-174-8501 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 70220 which rates the freight between FCL and LCL. 5307-00-174-8501 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5307-00-174-8501 is not classified as a special type of cargo when transported by water. 5307-00-174-8501 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-174-8501 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: