Premium Information is available for this item - Upgrade for $1 a day
5307-00-111-1894
Locked In Stud
5307001111894 001111894 RZA12099 J506P27
A headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED. View more Locked In Stud
August 2023
2
Marketplace 5307-00-111-1894
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-111-1894 1+ Documents (More...)
/fsg-53/fsc-5307/us
J506P27 STUD,LOCKED IN 17 EA NS Request Quotation FedMall Updated Every 15 Minutes 5307-00-111-1894 BUY
NE FedMall Updated Every Day 5307-00-111-1894 RQST NE Updated Every Day 5307-00-111-1894 RQST Updated
Restrictions 5307-00-111-1894
5307-00-111-1894 is a Locked In Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-111-1894
- US Air Force (FXGX)
- Effective Date:
- 1 Aug 2010
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Supplementary Collaborators:
- KE
Approved Sources 5307-00-111-1894
- Part Number
- Manufacturer
- Status
- RZA12099
- Manufacturer
- 83324 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- J506P27
- 07482 - General Electric Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5307-00-111-1894
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Serrated Portion To End Of Stud Thread [ADCX]
- 0.230 Inches Nominal
- Distance From Serrated Portion To Nut End [ADCT]
- 1.495 Inches Minimum And 1.515 Inches Maximum
- Distance From Serrated Portion To Stud End [ADCU]
- 0.735 Inches Minimum And 0.765 Inches Maximum
- Material [MATT]
- Titanium Alloy
- Nominal Thread Size [CQJX]
- 0.375 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.438 Inches Stud Thread
- Locking Feature [AAUM]
- Ring, Lock Serrated
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response
- Serration Included Angle [CWKL]
- 102.0 Degrees Nominal
- Serration Quantity [ADDW]
- 24
- Overall Length [ABHP]
- 2.250 Inches Minimum And 2.260 Inches Maximum
- Style Designator [STYL]
- Locked In
- Surface Finish [CSYM]
- 32.0 Microinches Nut Thd
- Surface Finish [CSYM]
- 32.0 Microinches Stud Thd
- Surface Finish [CSYM]
- 63.0 Microinches Shank
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.505 Inches Minimum Stud Thread And 0.535 Inches Maximum Stud Thread
- Thread Length [AASA]
- 1.260 Inches Minimum Nut Thread And 1.290 Inches Maximum Nut Thread
- Thread Quantity Per Inch [CMLP]
- 24 Nut Thread
- Thread Series Designator [THSD]
- Unc Stud Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Quantity Per Inch [CMLP]
- 14 Stud Thread
Weapon Systems (WSDC) 5307-00-111-1894
DLA Procurement Analysis 5307-00-111-1894
Management Data 5307-00-111-1894
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5307-00-111-1894
Freight Information 5307-00-111-1894
5307-00-111-1894 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-111-1894 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-111-1894 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-111-1894 is not classified as a special type of cargo when transported by water. 5307-00-111-1894 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-111-1894 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: