Premium Information is available for this item - Upgrade for $1 a day
5307-00-077-1181
Recessed Stud
5307000771181 000771181 3P34806-101
A headless fastener not exceeding twelve inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. One end or both ends may have a point. The unthreaded section may have more than one diameter, none of which may be greater than the maximum major thread diameter. It may be thread relieved. Excludes items with taper threads. View more Recessed Stud
May 2023
3
Marketplace 5307-00-077-1181
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-077-1181 1+ Documents (More...)
STUD,RECESSED 19 EA NS Request Quotation Subscribe to View Vendor Details... 3P34806-101 STUD 2
Day 5307-00-077-1181 RQST NE Updated Every Day 5307-00-077-1181 RQST Updated Every Day 5307-00-077-1181
Restrictions 5307-00-077-1181
5307-00-077-1181 is a Recessed Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-00-077-1181
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FGKZ
Approved Sources 5307-00-077-1181
- Part Number
- Manufacturer
- Status
- 3P34806-101
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-077-1181
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.323 Inches Nominal First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.077 Inches Minimum First Hole And 0.082 Inches Maximum First Hole
- Diameter Of Recessed Portion Of Shank [ADDA]
- 0.186 Inches Minimum And 0.196 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-T-570,Class S1 Fed Spec Single Material Response
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.250 Inches Stud Thread
- Length Of Recessed Portion Of Shank [ADCZ]
- 0.070 Inches Nominal
- Overall Length [ABHP]
- 1.640 Inches Nominal
- Style Designator [STYL]
- Recessed
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Length [AASA]
- 0.230 Inches Nominal Stud Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.690 Inches Nominal Nut Thread
- Thread Quantity Per Inch [CMLP]
- 28 Stud Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
DLA Procurement Analysis 5307-00-077-1181
Management Data 5307-00-077-1181
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JH
- C-141 STARLIFTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5307-00-077-1181
Freight Information 5307-00-077-1181
5307-00-077-1181 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-077-1181 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-077-1181 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-077-1181 is not classified as a special type of cargo when transported by water. 5307-00-077-1181 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-077-1181 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: