Studs - United States (US)
Federal Supply Class (FSC): 5307
NATO Supply Classification Class (NSC): 5307
Federal Supply Group (FSG): 53 Hardware and Abrasives
NATO Supply Classification Group (NSG): 53 Hardware and Abrasives
Items Managed by United States (US) - NCB is 00 to 09
Page 47 of 133
NSN Format for Studs
Codified by United States
| 53 | 07 | 01 | XXX | XXXX | |||
|---|---|---|---|---|---|---|---|
| Group FSG | Class | NCB | Identifier | ||||
| FSC Federal Supply Class | NIIN | ||||||
| NSN | |||||||
NATO Supply Class 5307 refers to the category of studs within NATO Supply Group 53, which is dedicated to hardware and abrasives. Studs are commonly used in various industries for fastening purposes.
In the NATO Codification System (NCS), each item is assigned a unique NATO Stock Number (NSN) to facilitate standardized identification and procurement across NATO member countries. The NSN for studs falls under the 5307 category.
Studs are typically cylindrical rods with threads on both ends, designed to be inserted into a pre-drilled hole and secured with a nut or other fastening mechanism. They are commonly used in construction, automotive, and manufacturing industries for joining components together.
NATO Supply Class 5307 includes various types of studs, such as threaded studs, weld studs, and stud bolts. These studs can be made from different materials, including steel, stainless steel, and brass, depending on the specific application requirements.
The classification of studs under NATO Supply Group 53 for Hardware And Abrasives indicates that they are considered essential hardware components used in various applications, alongside other items like screws, bolts, nuts, washers, and abrasives.
By using the NATO Supply Class and Group system, NATO member countries can easily identify and procure the required studs for their military and civilian operations, ensuring compatibility and interoperability among different nations.
It's important to note that the NATO Supply Class and Group system is primarily used for military logistics and procurement purposes. However, the classification can also be helpful for non-military organizations or individuals who require standardized identification and procurement of studs within the hardware and abrasives industry.
Frequently Asked Questions(FAQ) for Federal Supply Class 5307
- What is Federal Supply Class 5307?
- FSC 5307 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5307) in the USA for supply items codified in the category of Studs.
- What is NATO Supply Classification Class 5307?
- NSC 5307 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5307 in the USA) for supply items codified in the category of Studs.
- Which Federal Supply Group is FSC 5307 in?
- FSC 5307 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
- Which NATO Supply Classification Group is NSC 5307 in?
- NSC 5307 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.
Supply Items Included in Federal Supply Class 5307
- What is a Recessed And Stepped Stud? 215 Items
- A Recessed And Stepped Stud (STUD,RECESSED AND STEPPED) is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. The unthreaded section must have more than one diameter, none of which may be larger than the maximum major diameter of the larger thread. It may be thread relieved. Excludes items with tapered threads.
- What is a Shouldered And Stepped Stud? 701 Items
- A Shouldered And Stepped Stud (STUD,SHOULDERED AND STEPPED) is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN.
- What is a Recessed Stud? 277 Items
- A Recessed Stud (STUD,RECESSED) is a headless fastener not exceeding twelve inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. One end or both ends may have a point. The unthreaded section may have more than one diameter, none of which may be greater than the maximum major thread diameter. It may be thread relieved. Excludes items with taper threads.
- What is a Shouldered Stud? 2207 Items
- A Shouldered Stud (STUD,SHOULDERED) is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN.
- What is a Plain Stud? 11113 Items
- A Plain Stud (STUD,PLAIN) is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
- What is a Stepped Stud? 1409 Items
- A Stepped Stud (STUD,STEPPED) is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. The entire unthreaded portion must be of a single diameter equal to or smaller than the maximum major diameter of the larger threaded end. Includes radial grooves or thread reliefs. Excludes items with tapered threads.
- What is a Continuous Thread Stud? 3635 Items
- A Continuous Thread Stud (STUD,CONTINUOUS THREAD) is a headless fastener not exceeding 12 inches (304.8 mm) in length having an external thread of one nominal diameter running from end to end. See also ROD, CONTINUOUS THREAD.
- What is a Locked In Stud? 1333 Items
- A Locked In Stud (STUD,LOCKED IN) is a headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED.
- What is a Welding Stud? 803 Items
- A Welding Stud (STUD,WELDING) is a headed or headless fastener externally or internally threaded. It is intended for fastening by welding the head, unthreaded end or welding tip. If headed, the head is not designed to be self-holding, nor to be turned with a wrench or inserted driver, nor does the head have small raised projections on the top or underside to facilitate welding. See also BOLT, WELDING.
- What is a Ball Stud? 480 Items
- A Ball Stud (STUD,BALL) is a metal item with a spherical shaped head and a straight and/or tapered body, usually with a threaded shank.
- What is a Self-Locking Stud? 1177 Items
- A Self-Locking Stud (STUD,SELF-LOCKING) is a headed fastener threaded externally on a portion or on the full length of the shank. The head has projections on the underside or periphery, or is otherwise designed to be mechanically pressed and embedded in a metallic panel, or the like. It is securely locked in position by the displaced metal. For items that require locking rings, see BOLT, SELF-LOCKING and STUD, LOCKED IN. Excludes INSERT, SCREW THREAD.
- What is a Thread Forming Tapping Stud? 25 Items
- A Thread Forming Tapping Stud (STUD,TAPPING,THREAD FORMING) is a hardened externally threaded fastener whose thread usually extends from a dog type point to the opposite end. The threaded shank usually is a smooth triangular shape designed to form its own mating thread.
- What is a Bonded Stud? 450 Items
- A Bonded Stud (STUD,BONDED) is a headed fastener, externally threaded. The head is intended to be fastened by an adhesive. The head may also be fastened with rivets. The head is not designed to be turned with a wrench or inserted driver.
- What is a Wheel Locator Stud? 39 Items
- A Wheel Locator Stud (LOCATOR STUD,WHEEL) is a headed cylindrical shaped item threaded on one end having a solid shank used to locate rim on the wheel.
Stock Items From Supply Class 5307 Page 47 of 133
- 004684551
- STD329-130
- RNCC: 3 | RNVC: 2
- 5307-99-606
- RNCC: 6 | RNVC: 9
- 004659382
- 9194471
- RNCC: 3 | RNVC: 2
- 004657095
- 3561-39376
- RNCC: 3 | RNVC: 2
- 004656787
- P6992
- RNCC: 3 | RNVC: 2
- P6992
- RNCC: 5 | RNVC: 9
- 004648759
- 12S230-11
- RNCC: 3 | RNVC: 2
- 004648743
- 9724A0440
- RNCC: 3 | RNVC: 2
- 222418-000
- RNCC: 7 | RNVC: 2
- 004643241
- 138971-03
- RNCC: 3 | RNVC: 2
- 004627751
- 11010
- RNCC: 3 | RNVC: 2
- 11010
- RNCC: 5 | RNVC: 2
- 004623343
- NM94194
- RNCC: 3 | RNVC: 2
- 004621707
- C200070935
- RNCC: 3 | RNVC: 2
- 004620512
- 18USL214
- RNCC: 3 | RNVC: 2
- 004620522
- 30USL8
- RNCC: 3 | RNVC: 2
- 004620516
- 33USL216
- RNCC: 3 | RNVC: 2
- 004620520
- 67USL215
- RNCC: 3 | RNVC: 2
- 004620515
- 20USL214
- RNCC: 3 | RNVC: 2
- 004620514
- 19USL216
- RNCC: 3 | RNVC: 2
- 004620511
- 14USL215
- RNCC: 3 | RNVC: 2
- 14USL215
- RNCC: 5 | RNVC: 2
- 004620507
- 12USL214
- RNCC: 3 | RNVC: 2
- 004620521
- 8USL214
- RNCC: 3 | RNVC: 2
- 004614334
- 32-0749-1
- RNCC: 3 | RNVC: 2
- 004582346
- 10556321-2
- RNCC: 3 | RNVC: 2
- 004582361
- 3D6627
- RNCC: 3 | RNVC: 2
- 004582345
- 10556321
- RNCC: 3 | RNVC: 2
- 004582342
- L7312
- RNCC: 3 | RNVC: 2
- 004548988
- 9757N0632
- RNCC: 3 | RNVC: 2
- 10556255
- RNCC: 3 | RNVC: 2
- 004541930
- F1001-16
- RNCC: 3 | RNVC: 2
- 004535786
- 6643176PC192
- RNCC: 3 | RNVC: 2
- 004531078
- STD329-80
- RNCC: 3 | RNVC: 2
- 5307-99-606
- RNCC: 6 | RNVC: 9
- 004526724
- UBS21E14
- RNCC: 3 | RNVC: 2
- 004521429
- 510S062ST16
- RNCC: 3 | RNVC: 2
- 004508653
- 6720-69202-1
- RNCC: 3 | RNVC: 2
- 004498854
- 769-3-316206
- RNCC: 3 | RNVC: 2
- 004496139
- 1911603-2
- RNCC: 3 | RNVC: 2
- 1911603-2
- RNCC: 5 | RNVC: 9
- 004486417
- 84-181113
- RNCC: 3 | RNVC: 2
- 004486324
- 18206-1
- RNCC: 3 | RNVC: 2