5307-15-105-5235

4720-33-205-5596 4720332055596 332055596 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5310-14-205-5596 5310142055596 142055596 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

8455-98-205-5596 8455982055596 982055596 is an insignia to indicate a service, department, or profession, such as quartermaster corps, marine corps, infantry, medical service and the like. excludes insignia, shoulder sleeve; group-rate mark; insignia, hat; insignia, service cap; insignia, garrison cap and insignia, service hat and service cap.

5340-00-205-5596 5340002055596 002055596 is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. if hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. excludes cargo hooks with safety devices.

6350-15-205-5596 6350152055596 152055596 SIRENA