Premium Information is available for this item - Upgrade for $1 a day
5306-01-588-8100
Close Tolerance Bolt
5306015888100 015888100 SAE-AS91111-04 MS9111-04
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
January 2023
5
Marketplace 5306-01-588-8100
Request a Quotation from participating marketplace vendors
Restrictions 5306-01-588-8100
5306-01-588-8100 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-588-8100
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-588-8100
- Netherlands (ZN01)
- Effective Date:
- 1 Oct 2010
Approved Sources 5306-01-588-8100
- Part Number
- Manufacturer
- Status
- SAE-AS91111-04
- Manufacturer
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- SAE-AS91111-04
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- MS9111-04
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-588-8100
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.438 Inches Nominal
- Extended Washer Thickness [AATD]
- 0.060 Inches Minimum And 0.070 Inches Maximum
- Fastener Length [AASB]
- 0.750 Inches Nominal
- Grip Diameter [AAUR]
- 0.2494 Inches Minimum And 0.2499 Inches Maximum
- Grip Length [ANEE]
- 0.125 Inches Nominal
- Head Height [AASU]
- 0.330 Inches Nominal
- Head Style [AASK]
- Double Hexagon W/Hole
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Material Document And Classification [MDCL]
- A-55731 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
- Width Between Flats [AATB]
- 0.305 Inches Minimum And 0.313 Inches Maximum
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.625 Inches Maximum
NATO Stock Numbers Related to 5306-01-588-8100
Freight Information 5306-01-588-8100
5306-01-588-8100 has freight characteristics.. 5306-01-588-8100 has a variance between NMFC and UFC when transported by rail and the description should be consulted.