Premium Information is available for this item - Upgrade for $1 a day
5306-01-556-6464
Machine Bolt
5306015566464 015566464 12759-00551 14363 3821052C1 ESP-B-2.101-GS ESP-B-2.121-PP
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
November 2023
17
Marketplace 5306-01-556-6464
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5306-01-556-6464 5+ Documents (More...)
Day 3821052C1 RQST NE Updated Every Day ESP-B-2.101-GS RQST NE Updated Every Day ESP-B-2.121-PP RQST
NE Updated Every Day 5306-01-556-6464 RQST NE Updated Every Day 5306-01-556-6464 RQST Updated Every Day
-2.101-GS ESP-B-2.121-PP ESP-F-16.101-GS ESP-F-16.104-PP ESP-EM https//www.nsnlookup.com /fsg-53/fsc-
ESP-B-2.121-PP 00286 8305637 3544378C1 40209R1 ESP-EM-58.121 -PP 00 33847 25710R1 120396 103343 ESP-B
RQST NE Updated Every Day ESP-B-2.121-PP RQST NE Updated Every Day 5306-01-371-4685 RQST NE Updated
RQST NE Updated Every Day ESP-B-2.121-PP RQST NE Updated Every Day 5306-01-371-4685 RQST NE Updated
RQST NE Updated Every Day ESP-B-2.101-GS RQST NE Updated Every Day 5306-01-555-4983 RQST NE Updated
00286 8305637 3544378C1 40209R1 ESP-EM-58.121 -PP 00 33847 25710R1 120396 103343 ESP-B -2.101-GS
threaded fastener designed for insertion through holes Day 24877R1 RQST NE Updated Every Day ESP-B-2.121-PP
ESP-B-2.121-PP Self-Locking Nut 5310012745632 012745632,27616R1 00 33847 25710R1 120396 103343 ESP-B
Restrictions 5306-01-556-6464
5306-01-556-6464 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-556-6464
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-556-6464
- US Army (A919)
- Effective Date:
- 1 Oct 2007
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2008
- US Marine Corps (MC47)
- Effective Date:
- 1 Oct 2007
Approved Sources 5306-01-556-6464
- Part Number
- Manufacturer
- Status
- 14363
- Manufacturer
- 0Y3H3 - Fastenal Company (Active)
- Primary Buy
- Primary Buy
- 3821052C1
- 338X5 - Nd Defense Llc (Active)
- Secondary Buy
- Secondary Buy
- 12759-00551
- 0Y3H3 - Fastenal Company (Active)
- Advisory Reference
- Advisory Reference
- ESP-B-2.101-GS
- 338X5 - Nd Defense Llc (Active)
- Informational Drawing
- Informational Drawing
- ESP-B-2.121-PP
- 338X5 - Nd Defense Llc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5306-01-556-6464
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Head Style [AASK]
- Hexagon
- Thread Series Designator [THSD]
- Unc
- Nominal Thread Diameter [AHYM]
- 0.750 Inches
- Thread Quantity Per Inch [CMLP]
- 10
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 1.750 Inches Nominal
- Fastener Length [AASB]
- 2.420 Inches Minimum And
- Fastener Length [AASB]
- 2.500 Inches Maximum
- Material [MATT]
- Steel Overall
- Material Document And Classification [MDCL]
- Sae J429, Grade 8 Assn Std Single Material Response Overall
- Surface Treatment [SFTT]
- Oil Overall
- Head Height [AASU]
- 0.455 Inches Minimum And
- Head Height [AASU]
- 0.483 Inches Maximum
- Width Between Flats [AATB]
- 1.100 Inches Minimum And
- Width Between Flats [AATB]
- 1.125 Inches Maximum
- End Item Identification [AGAV]
- Mrap - Unique Nsn - Maxxpro Cat I
- Part Name Assigned By Controlling Agency [CXCY]
- Bolt, Hex Cap 3/4-10 X 2-1/2
Weapon Systems (WSDC) 5306-01-556-6464
DLA Procurement Analysis 5306-01-556-6464
- Last Stock Position:
- 5609 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-556-6464
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5306-01-556-6464
Freight Information 5306-01-556-6464
5306-01-556-6464 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-556-6464 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-556-6464 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-556-6464 is not classified as a special type of cargo when transported by water. 5306-01-556-6464 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-556-6464
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-556-6464 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E418P0282
- 20 Nov 2017
- Subscribe
- 4215
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V3319
- 11 Jan 2017
- Subscribe
- 4550
- Subscribe
- Subscribe
- Subscribe
- SPE5E415VA131
- 20 Aug 2015
- Subscribe
- 2240
- Subscribe
- Subscribe
- Subscribe
- SPM5E413M3158
- 21 Mar 2013
- Subscribe
- 5236
- Subscribe
- Subscribe
- Subscribe
- SPM5E413V1408
- 11 Jan 2013
- Subscribe
- 1325
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-556-6464 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: