Premium Information is available for this item - Upgrade for $1 a day
5306-01-504-6218
Machine Bolt
5306015046218 015046218 B1823510140N
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
November 2023
1
Marketplace 5306-01-504-6218
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-504-6218 2+ Documents (More...)
United States (US) 4. 5306-01-504-6218 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5306-01-504-6218 RQST NE Updated Every Day 5306-01-504-6218 RQST
Machine Bolt 5306015046218 015046218 Datasheet 5306-01-504-6218 CharacteristicSpecificationsFIIGA003B0End
Restrictions 5306-01-504-6218
5306-01-504-6218 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-504-6218
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-504-6218
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Aug 2005
Approved Sources 5306-01-504-6218
- Part Number
- Manufacturer
- Status
- B1823510140N
- Manufacturer
- 80204 - American National Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5306-01-504-6218
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- End Item Identification [AGAV]
- 2310-01-372-3934
- External Thread Tolerance Class [CQWR]
- 6G
- Fastener Length [AASB]
- 140.0 Millimeters Nominal
- Head Height [AASU]
- 6.17 Millimeters Minimum And 6.85 Millimeters Maximum
- Head Style [AASK]
- Hexagon
- Material Document And Classification [MDCL]
- Saej1199 Assn Std Single Material Response Overall
- Material [MATT]
- Steel Property Class 10.9 Overall
- Nominal Thread Diameter [AHYM]
- 10.0 Millimeters
- Thread Series Designator [THSD]
- M
- Thread Pitch In Millimeters [CQQR]
- 1.50
- Width Between Flats [AATB]
- 15.57 Millimeters Minimum And 16.00 Millimeters Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-Z-2, Type Ii, Class 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Zinc Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 32.0 Millimeters Nominal
Weapon Systems (WSDC) 5306-01-504-6218
DLA Procurement Analysis 5306-01-504-6218
- Last Stock Position:
- 54 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-504-6218
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Apr 2020
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5306-01-504-6218
Freight Information 5306-01-504-6218
5306-01-504-6218 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-504-6218 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-504-6218 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-504-6218 is not classified as a special type of cargo when transported by water. 5306-01-504-6218 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5306-01-504-6218 8 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E418V1373
- 09 Nov 2017
- Subscribe
- 33
- Subscribe
- Subscribe
- Subscribe
- SPE5E417VA133
- 05 Sep 2017
- Subscribe
- 12
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V9026
- 02 Aug 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V8898
- 27 Jul 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V7779
- 08 Jun 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V4793
- 22 Feb 2017
- Subscribe
- 2
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V0903
- 28 Oct 2016
- Subscribe
- 10
- Subscribe
- Subscribe
- Subscribe
- SPE5E416M2983
- 13 Sep 2016
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-504-6218 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: