Premium Information is available for this item - Upgrade for $1 a day
5306-01-503-3593
U Bolt
5306015033593 015033593 BACC10LR14-18C BACC10Y14-18C
An externally threaded fastener bent approximately 180 degrees (3.141 radians) in the shape of the letter U and with both ends threaded. View more U Bolt
November 2023
2

Marketplace 5306-01-503-3593
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-503-3593 1+ Documents (More...)
BACC10LR14-18C BOLT,U 14 EA NS Request Quotation FedMall Updated Every 15 Minutes 5306-01-503-3593 BUY
NE FedMall Updated Every Day 5306-01-503-3593 RQST NE Updated Every Day 5306-01-503-3593 RQST Updated
Restrictions 5306-01-503-3593
5306-01-503-3593 is a U Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-503-3593
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-503-3593
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Supplementary Receivers:
- SX
Approved Sources 5306-01-503-3593
- Part Number
- Manufacturer
- Status
- BACC10LR14-18C
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACC10LR14-18C
- 18076 - Umpco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- BACC10Y14-18C
- 81205 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACC10Y14-18C
- 08073 - Mamco Mfg Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- BACC10Y14-18C
- 18076 - Umpco, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-503-3593
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Inside Center Of Bend To Bolt End [AAWV]
- 1.750 Inches Nominal
- End Item Identification [AGAV]
- B-52 Aircraft
- Material Document And Classification [MDCL]
- Mil-S-18732 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 431 Overall
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Inside Distance Between Shanks [AAWW]
- 1.355 Inches Minimum And 1.395 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 32
- Style Designator [STYL]
- Round Bend
- Surface Treatment Document And Classification [STDC]
- Qq-P-35,Type Ii Or Viii Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.380 Inches Nominal
Weapon Systems (WSDC) 5306-01-503-3593
DLA Procurement Analysis 5306-01-503-3593
- Last Stock Position:
- 55 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-503-3593
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-503-3593
Freight Information 5306-01-503-3593
5306-01-503-3593 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-503-3593 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-503-3593 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 574 for ocean manifesting and military sealift. 5306-01-503-3593 is not classified as a special type of cargo when transported by water. 5306-01-503-3593 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-503-3593
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-503-3593 3 Records
Contracting Technical Data File (CTDF) 5306-01-503-3593 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: