Premium Information is available for this item - Upgrade for $1 a day
5306-01-501-2065
Aircraft Shear Bolt
5306015012065 015012065 MS14181-12030P
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS. View more Shear Bolt
November 2023
2
Marketplace 5306-01-501-2065
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-501-2065 2+ Documents (More...)
Updated Every Day 5306-01-501-2065 RQST NE Related Documents 5306-01-501-2065 2+ Documents ( More...
BUY NE FedMall Updated Every Day 5306-01-501-2065 RQST NE Updated Every Day 5306-01-501-2065 RQST Updated
Aircraft Shear Bolt 5306015012065 015012065 day Upgrade your Account Upgrade 5306-01-501-2065Aircraft
Shear Bolt5306015012065 015012065 MS14181-12030P 2 AMSC G IMC Z IMCACTY GH Approved Sources 5306-01-
Restrictions 5306-01-501-2065
5306-01-501-2065 is a Aircraft Shear Bolt that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-501-2065
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-501-2065
- US Air Force (FGGI)
- Effective Date:
- 1 Jun 2009
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2009
- Supplementary Collaborators:
- GTKE
Approved Sources 5306-01-501-2065
- Part Number
- Manufacturer
- Status
- MS14181-12030P
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
Datasheet 5306-01-501-2065
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Criticality Code Justification [CRTL]
- Agav
- End Item Identification [AGAV]
- V-22
- Extended Washer Thickness [AATD]
- 0.080 Inches Minimum And 0.098 Inches Maximum
- Extended Washer Diameter [AATC]
- 1.384 Inches Minimum And 1.394 Inches Maximum
- Fastener Length [AASB]
- 3.058 Inches Minimum And 3.088 Inches Maximum
- Grip Diameter [AAUR]
- 0.748 Inches Minimum And 0.749 Inches Maximum
- Grip Length [ANEE]
- 1.175 Inches Minimum And 1.195 Inches Maximum
- Head Height [AASU]
- 0.590 Inches Minimum And 0.610 Inches Maximum
- Head Minor Diameter [AAZH]
- 0.797 Inches Minimum And 0.812 Inches Maximum
- Head Style [AASK]
- Spline Extended Washer
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.750 Inches
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 16
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 1.173 Inches Nominal
Weapon Systems (WSDC) 5306-01-501-2065
DLA Procurement Analysis 5306-01-501-2065
- Last Stock Position:
- 32 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-501-2065
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5306-01-501-2065
Freight Information 5306-01-501-2065
5306-01-501-2065 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-501-2065 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5306-01-501-2065 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-501-2065 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-501-2065 is not classified as a special type of cargo when transported by water. 5306-01-501-2065 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-501-2065
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-01-501-2065 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: