Premium Information is available for this item - Upgrade for $1 a day
5306-01-433-5833
Close Tolerance Bolt
5306014335833 014335833 VAL23029-5D20 AIC753-5D20 MB61-5D20 VS3204-5D20 HP5453-5D20 GS1016-5D20 11825-5D20 BM17019-5D20 109453-5D20 PBF1253-5D20 109543-5D20 S11-1060-5D20 FIT7047-5D20 ST3M453-5D20
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
17
Marketplace 5306-01-433-5833
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-433-5833 1+ Documents (More...)
-5D20 PBF1253-5D20 109543-5D20 S11-1060-5D20 FIT7047-5D20 ST3M453-5D20 An externally threaded fastener
ST3M453-5D20 BOLT,CLOSE TOLERANCE 1 EA NS Request Quotation Updated Every Day 5306-01-433-5833 RQST NE
Restrictions 5306-01-433-5833
5306-01-433-5833 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-433-5833
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-433-5833
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Singapore (YJ01)
- Effective Date:
- 1 Jan 2013
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5306-01-433-5833
- Part Number
- Manufacturer
- Status
- VAL23029-5D20
- Manufacturer
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- AIC753-5D20
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- MB61-5D20
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- MB61-5D20
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- VS3204-5D20
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HP5453-5D20
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- GS1016-5D20
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 11825-5D20
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- BM17019-5D20
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- 109453-5D20
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- PBF1253-5D20
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 109543-5D20
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- S11-1060-5D20
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- FIT7047-5D20
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- BM17019-5D20
- 17419 - Deutsch Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- VS3204-5D20
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M453-5D20
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-01-433-5833
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.603 Inches Nominal First Hole
- Fastener Length [AASB]
- 1.701 Inches Minimum And 1.748 Inches Maximum
- Grip Diameter [AAUR]
- 0.3115 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 1.240 Inches Minimum And 1.260 Inches Maximum
- Head Height [AASU]
- 0.147 Inches Minimum And 0.167 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Steel Comp Xm-13 Overall
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.078 Inches Minimum First Hole And 0.081 Inches Maximum First Hole
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
- Width Between Flats [AATB]
- 0.502 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.467 Inches Nominal
Weapon Systems (WSDC) 5306-01-433-5833
DLA Procurement Analysis 5306-01-433-5833
- Last Stock Position:
- 143 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-433-5833
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-01-433-5833
Freight Information 5306-01-433-5833
5306-01-433-5833 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093470. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS I/S. 5306-01-433-5833 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48940 which rates the freight between FCL and LCL. 5306-01-433-5833 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-433-5833 is not classified as a special type of cargo when transported by water. 5306-01-433-5833 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-433-5833
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-433-5833 14 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623FBCRK
- 20 Aug 2023
- Subscribe
- 172
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FBCRK
- 20 Aug 2023
- Subscribe
- 172
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F7789
- 17 Feb 2022
- Subscribe
- 56
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F7789
- 17 Feb 2022
- Subscribe
- 56
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F5465
- 17 Dec 2021
- Subscribe
- 17
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F5465
- 17 Dec 2021
- Subscribe
- 17
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F1359
- 15 Oct 2021
- Subscribe
- 39
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F1359
- 15 Oct 2021
- Subscribe
- 39
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F514H
- 24 Sep 2021
- Subscribe
- 46
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F514H
- 24 Sep 2021
- Subscribe
- 46
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F407M
- 13 Aug 2021
- Subscribe
- 33
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F407M
- 13 Aug 2021
- Subscribe
- 33
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V4644
- 16 Feb 2017
- Subscribe
- 357
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V2358
- 18 Dec 2015
- Subscribe
- 176
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-433-5833 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: