Premium Information is available for this item - Upgrade for $1 a day
5306-01-407-9496
Shear Bolt
5306014079496 014079496 123710-5-14 VCG0016-5-14 AIC1654-5-14 SLB187-5-14 DF33004-5-14 03A099-5-14 PBF1421-5-14 SII1182-5-14 MB210-5-14 VS3318-5-14
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS. View more Shear Bolt
November 2023
13
Marketplace 5306-01-407-9496
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-407-9496 4+ Documents (More...)
Restrictions 5306-01-407-9496
5306-01-407-9496 is a Shear Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-407-9496
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-407-9496
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5306-01-407-9496
- Part Number
- Manufacturer
- Status
- 123710-5-14
- Manufacturer
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VCG0016-5-14
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- AIC1654-5-14
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- SLB187-5-14
- 16258 - Space-Lok, Inc. (Active)
- Secondary Buy
- Secondary Buy
- DF33004-5-14
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A099-5-14
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- PBF1421-5-14
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- SII1182-5-14
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- MB210-5-14
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- MB210-5-14
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- VS3318-5-14
- 9N513 - Voi-Shan/Chatsworth (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- DF33004-5-14
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-407-9496
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.575 Inches Minimum And 0.585 Inches Maximum
- Extended Washer Thickness [AATD]
- 0.035 Inches Minimum And 0.055 Inches Maximum
- Fastener Length [AASB]
- 0.875 Inches Nominal
- Grip Diameter [AAUR]
- 0.3110 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.875 Inches Nominal
- Head Height [AASU]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Head Minor Diameter [AAZH]
- 0.360 Inches Minimum And 0.375 Inches Maximum
- Head Style [AASK]
- Spline Extended Washer
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Fastener
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.538 Inches Nominal
DLA Procurement Analysis 5306-01-407-9496
Management Data 5306-01-407-9496
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-407-9496
Freight Information 5306-01-407-9496
5306-01-407-9496 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-407-9496 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-407-9496 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-407-9496 is not classified as a special type of cargo when transported by water. 5306-01-407-9496 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5306-01-407-9496 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: