Premium Information is available for this item - Upgrade for $1 a day
5306-01-362-1436
Shoulder Bolt
5306013621436 013621436 AIC297-10-40Y VCG0035-10-40Y 123136-10-40Y C9507-10-40Y
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. View more Shoulder Bolt
May 2023
2
Marketplace 5306-01-362-1436
Request a Quotation from participating marketplace vendors
Restrictions 5306-01-362-1436
5306-01-362-1436 is a Shoulder Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-362-1436
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-362-1436
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5306-01-362-1436
- Part Number
- Manufacturer
- Status
- AIC297-10-40Y
- Manufacturer
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VCG0035-10-40Y
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 123136-10-40Y
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- C9507-10-40Y
- 81755 - Lockheed Martin Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-01-362-1436
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Thickness [AATD]
- 0.080 Inches Minimum And 0.100 Inches Maximum
- Extended Washer Diameter [AATC]
- 1.153 Inches Minimum And 1.163 Inches Maximum
- Fastener Length [AASB]
- 3.505 Inches Minimum And 3.535 Inches Maximum
- Hardness Rating [CQFM]
- 46.0 Rockwell C Minimum Fastener And 50.0 Rockwell C Maximum Fastener
- Head Height [AASU]
- 0.552 Inches Minimum And 0.572 Inches Maximum
- Head Style [AASK]
- Spline Extended Washer
- Head Minor Diameter [AAZH]
- 0.673 Inches Minimum And 0.688 Inches Maximum
- Material [MATT]
- Steel Comp H11 Overall
- Nominal Thread Diameter [AHYM]
- 0.625 Inches
- Material Document And Classification [MDCL]
- Ams6487 Assn Std Single Material Response Overall
- Shoulder Diameter [AATN]
- 0.654 Inches Minimum First Shoulder And 0.655 Inches Maximum First Shoulder
- Shoulder Length [AATX]
- 2.490 Inches Minimum First Shoulder And 2.510 Inches Maximum First Shoulder
- Shoulder Shape [CWYB]
- Round First Shoulder
- Thread Series Designator [THSD]
- Unc
- Surface Treatment Document And Classification [STDC]
- Mil-C-8837,Type 2,Cl 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.995 Inches Minimum And 1.045 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 18
DLA Procurement Analysis 5306-01-362-1436
Management Data 5306-01-362-1436
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-362-1436
Freight Information 5306-01-362-1436
5306-01-362-1436 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-362-1436 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-362-1436 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-362-1436 is not classified as a special type of cargo when transported by water. 5306-01-362-1436 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5306-01-362-1436 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: