Premium Information is available for this item - Upgrade for $1 a day
5306-01-361-7053
Close Tolerance Bolt
5306013617053 013617053 GB511GF5H12 VCC0090-5H12 PBF1478-5H12
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
May 2023
12
Marketplace 5306-01-361-7053
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-361-7053 1+ Documents (More...)
Restrictions 5306-01-361-7053
5306-01-361-7053 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5306-01-361-7053
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5306-01-361-7053
- Part Number
- Manufacturer
- Status
- GB511GF5H12
- Manufacturer
- 26512 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- GB511GF5H12
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- GB511GF5H12
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- GB511GF5H12
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- VCC0090-5H12
- 06710 - Valley-Todeco, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PBF1478-5H12
- 27624 - Sps Technologies Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-361-7053
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.521 Inches Minimum And 0.531 Inches Maximum
- Extended Washer Thickness [AATD]
- 0.082 Inches Nominal
- Fastener Length [AASB]
- 1.215 Inches Minimum And 1.245 Inches Maximum
- Grip Diameter [AAUR]
- 0.3115 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.740 Inches Minimum And 0.760 Inches Maximum
- Head Height [AASU]
- 0.338 Inches Minimum And 0.358 Inches Maximum
- Head Style [AASK]
- Double Hexagon W/Hole
- Hole Diameter [AAUB]
- 0.050 Inches Minimum And 0.060 Inches Maximum
- Hole Configuration Style [CRHC]
- Double Hexagon Longitudinal Hole
- Hole Quantity [ASXK]
- 4
- Hole Type [BQDM]
- Drilled
- Minimum Tensile Strength [CQBC]
- 132000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.367 Inches Minimum And 0.376 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.480 Inches Nominal
DLA Procurement Analysis 5306-01-361-7053
Management Data 5306-01-361-7053
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5306-01-361-7053
Freight Information 5306-01-361-7053
5306-01-361-7053 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-361-7053 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-361-7053 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-361-7053 is not classified as a special type of cargo when transported by water. 5306-01-361-7053 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5306-01-361-7053 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: