Premium Information is available for this item - Upgrade for $1 a day
5306-01-338-5605
Machine Bolt
5306013385605 013385605 FF-S-86 MS21098-81
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
August 2023
3
Marketplace 5306-01-338-5605
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-338-5605 5+ Documents (More...)
FF/S/86 BOLT,MACHINE 48 EA NS Request Quotation Subscribe to View Vendor Details...
FF-S-86 BOLT,MACHINE 4 EA NS Request Quotation Updated Every Day 5306-01-338-5605 RQST NE Updated Every
FF/S/86 BOLT,INTERNAL WRENCHING 48 EA NS Request Quotation Subscribe to View Vendor Details...
FF/S/86 SPACER,SLEEVE 48 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5306/us 5306-01-319-1522 Machine Bolt 5306013191522 013191522,FF-S-86 FF/S/86 BOLT,MACHINE
FF/S/86 SPACER,SLEEVE 48 EA NS Request Quotation Subscribe to View Vendor Details...
FF/S/86 SPACER,SLEEVE 48 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5306/us 5306-01-338-5605 Machine Bolt 5306013385605 013385605,FF-S-86 FF/S/86 BOLT,MACHINE
FF/S/86 SPACER,SLEEVE 48 EA NS Request Quotation Subscribe to View Vendor Details...
FF/S/86 SPACER,SLEEVE 48 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5306-01-338-5605
5306-01-338-5605 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-338-5605
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-338-5605
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 5306-01-338-5605
- Part Number
- Manufacturer
- Status
- MS21098-81
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- FF-S-86
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5306-01-338-5605
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Thickness [AATD]
- 0.115 Inches Minimum And 0.135 Inches Maximum
- Extended Washer Diameter [AATC]
- 0.550 Inches Minimum And 0.562 Inches Maximum
- Fastener Length [AASB]
- 1.734 Inches Minimum And 1.781 Inches Maximum
- Features Provided [CBBL]
- Finished Head
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Fastener And 45.0 Rockwell C Maximum Fastener
- Head Height [AASU]
- 0.368 Inches Minimum And 0.375 Inches Maximum
- Head Style [AASK]
- Double Hexagon W/Hole
- Material [MATT]
- Plastic Polyamide Locking Featuresteel Fastener
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Locking Feature [AAUM]
- Patch Threads Or Strip Threads Or Pellet Threads
- Thread Series Designator [THSD]
- Unf
- Width Between Flats [AATB]
- 0.367 Inches Minimum And 0.376 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty2 Cl3 Fed Spec Single Treatment Response Fastener
- Surface Treatment [SFTT]
- Cadmium Fastener And Chromate Fastener
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 1.250 Inches Minimum And 1.781 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-01-338-5605
DLA Procurement Analysis 5306-01-338-5605
Management Data 5306-01-338-5605
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Jul 2023
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5306-01-338-5605
Freight Information 5306-01-338-5605
5306-01-338-5605 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156600. A Sub NMFC of Z. It has a NMFC Description of PLASTIC/RUBBER ARTICLE VIZ:. 5306-01-338-5605 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 5306-01-338-5605 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 772 for ocean manifesting and military sealift. 5306-01-338-5605 is not classified as a special type of cargo when transported by water. 5306-01-338-5605 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-338-5605
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-01-338-5605 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: