Premium Information is available for this item - Upgrade for $1 a day
5306-01-338-4013
Close Tolerance Bolt
5306013384013 013384013 BACB30UU9-24
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
May 2023
6
Marketplace 5306-01-338-4013
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-338-4013 3+ Documents (More...)
Restrictions 5306-01-338-4013
5306-01-338-4013 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-338-4013
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-338-4013
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
Approved Sources 5306-01-338-4013
- Part Number
- Manufacturer
- Status
- BACB30UU9-24
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACB30UU9-24
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 27624 - Sps Technologies Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 17943 - Federal Manufacturing Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 06710 - Valley-Todeco, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 57928 - Sonic Industries, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30UU9-24
- 17446 - Huck International, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5306-01-338-4013
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 2.090 Inches Minimum And 2.120 Inches Maximum
- Grip Diameter [AAUR]
- 0.5610 Inches Minimum And 0.5615 Inches Maximum
- Grip Length [ANEE]
- 1.490 Inches Minimum And 1.510 Inches Maximum
- Head Height [AASU]
- 0.318 Inches Minimum And 0.338 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.562 Inches
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.865 Inches Minimum And 0.877 Inches Maximum
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head32.0 Microinches Grip32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.605 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 18
DLA Procurement Analysis 5306-01-338-4013
Management Data 5306-01-338-4013
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5306-01-338-4013
Freight Information 5306-01-338-4013
5306-01-338-4013 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-338-4013 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-338-4013 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-338-4013 is not classified as a special type of cargo when transported by water. 5306-01-338-4013 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-338-4013
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-01-338-4013 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: