Premium Information is available for this item - Upgrade for $1 a day
5306-01-331-5799
Close Tolerance Bolt
5306013315799 013315799 STSBG001A06U010 GS1001A06U010 11701A06U010 VAL23602-6D010 PBF1042A6U010 AIC2264A06U010 8485-6A010 SII112828A06U010 VS2979A06U010 BM3210-6A010 BM3210-6A010A525
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
7
Marketplace 5306-01-331-5799
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-331-5799 3+ Documents (More...)
VS2979A06U010 BM3210-6A010 BM3210-6A010A525 An externally threaded fastener whose unthreaded portion
STSBG001A06U010 BOLT,CLOSE TOLERANCE 20 EA NS Request Quotation FedMall Updated Every 15 Minutes 5306
Close Tolerance Bolt 5306013315799 013315799 5799Close Tolerance Bolt5306013315799 013315799 STSBG001A06U010
GS1001A06U010 11701A06U010 VAL23602-6D010 Craftsman's Knife 5110014285207014285207 RQST NS Request Quotation
Close Tolerance Bolt 5306013315799 013315799 5799Close Tolerance Bolt5306013315799 013315799 STSBG001A06U010
GS1001A06U010 11701A06U010 VAL23602-6D010 428-5207 Craftsman's Knife 5110014285207 014285207 RQST NS
Restrictions 5306-01-331-5799
5306-01-331-5799 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-331-5799
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-331-5799
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FGKZ
Approved Sources 5306-01-331-5799
- Part Number
- Manufacturer
- Status
- STSBG001A06U010
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Source Control
- Source Control
- GS1001A06U010
- 1EM77 - B & B Specialties Inc (Active)
- Primary Buy
- Primary Buy
- 11701A06U010
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- VAL23602-6D010
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- PBF1042A6U010
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- AIC2264A06U010
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 8485-6A010
- 56876 - Alta Products Co Inc (Active)
- Secondary Buy
- Secondary Buy
- SII112828A06U010
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- VS2979A06U010
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BM3210-6A010
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- BM3210-6A010A525
- 17446 - Huck International, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-331-5799
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.028 Inches Minimum And 1.075 Inches Maximum
- Features Provided [CBBL]
- Cetyl Alcohol Lubricant
- Grip Diameter [AAUR]
- 0.3735 Inches Minimum And 0.3745 Inches Maximum
- Grip Length [ANEE]
- 0.623 Inches Nominal
- Head Height [AASU]
- 0.210 Inches Nominal
- Head Style [AASK]
- Double Hexagon
- Material Document And Classification [MDCL]
- Stsbs001,Cagec 98897 Mfr Ref Single Material Response Overall
- Material [MATT]
- Steel Comp H11 Overall
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.553 Inches Minimum And 0.564 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Stsbs001,Cagec 98897 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Chromate And Nickel And Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.419 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-01-331-5799
DLA Procurement Analysis 5306-01-331-5799
Management Data 5306-01-331-5799
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- TG
- AF SICA RESIDUAL MMAC-WR-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5306-01-331-5799
Freight Information 5306-01-331-5799
5306-01-331-5799 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-331-5799 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-331-5799 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-331-5799 is not classified as a special type of cargo when transported by water. 5306-01-331-5799 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-331-5799
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-331-5799 1 Records
Contracting Technical Data File (CTDF) 5306-01-331-5799 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: