Premium Information is available for this item - Upgrade for $1 a day
5306-01-323-5544
Machine Bolt
5306013235544 013235544 458300
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
June 2023
4
Marketplace 5306-01-323-5544
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-323-5544 5+ Documents (More...)
Every Day 5306-01-323-5544 RQST Updated Every Day 5306-01-323-5544 RQST NE Related Documents 5306-01
Bolt 5306013235544 013235544,458300 United States (US) 4. 5306-01-323-5544 Marketplace Restrictions
Machine Bolt 5306013235544 013235544,458300 5306-01-323-5544 RQST NE Related Documents 5306-01
66/fsc-6665/us 6665-01-210-6690 Calibration Kit 6665012106690 012106690 to View Vendor Details... 458300
for $1 a day Upgrade your Account Upgrade 6665-01-210-6690Calibration Kit6665012106690 012106690 458300
CALIBRATION KIT 1 EA NS Request Quotation Subscribe to View Vendor Details... 458300 CALIBRATION KIT
458300 CALIBRATION KIT 1 EA NS Request Quotation Subscribe to View Vendor https//www.nsnlookup.com /
- Upgrade for $1 a day Upgrade your Account Upgrade 3020-01-112-9016Chain3020011129016 011129016 458300
for $1 a day Upgrade your Account Upgrade 6665-01-210-6690Calibration Kit6665012106690 012106690 458300
Restrictions 5306-01-323-5544
5306-01-323-5544 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-323-5544
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-323-5544
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
Approved Sources 5306-01-323-5544
- Part Number
- Manufacturer
- Status
- 458300
- Manufacturer
- 7X677 - General Motors Llc (Active)
- Primary Buy
- Primary Buy
- 458300
- 11862 - General Motors Corp Chevrolet Motor (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-323-5544
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Thickness [AATD]
- 0.070 Inches Minimum And 0.080 Inches Maximum
- Extended Washer Diameter [AATC]
- 0.449 Inches Minimum And 0.469 Inches Maximum
- Fastener Length [AASB]
- 0.719 Inches Minimum And 0.750 Inches Maximum
- Head Height [AASU]
- 0.265 Inches Minimum And 0.285 Inches Maximum
- Head Style [AASK]
- Hexagon Extended Washer
- Material Document And Classification [MDCL]
- Sae J429 Gr8 Assn Std Single Material Response Fastener
- Material [MATT]
- Plastic Polyamide Locking Feature
- Material [MATT]
- Steel Fastener
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Locking Feature [AAUM]
- Strip Threads
- Thread Series Designator [THSD]
- Unrf
- Width Between Flats [AATB]
- 0.367 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Gm-4435-M Cagec 11862 National Spec Single Treatment Response Fastener
- Surface Treatment [SFTT]
- Phosphate Fastener
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2A
- Thread Length [AASA]
- 0.653 Inches Minimum And 0.663 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-01-323-5544
DLA Procurement Analysis 5306-01-323-5544
Management Data 5306-01-323-5544
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5306-01-323-5544
Freight Information 5306-01-323-5544
5306-01-323-5544 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-323-5544 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-323-5544 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-323-5544 is not classified as a special type of cargo when transported by water. 5306-01-323-5544 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-323-5544
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-323-5544 2 Records
Contracting Technical Data File (CTDF) 5306-01-323-5544 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: