Premium Information is available for this item - Upgrade for $1 a day
5306-01-319-4844
Close Tolerance Bolt
5306013194844 013194844 VCJ001-16-104 PB1420-16-104 AIC1635-16-104 VS3319-16-104 MB209-16-104 SI1188-16-104 VCJ0001-16-104 DF33003-16-104 03A098-16-104 123709-16-104 AIC1653-16-104 X409-16-104
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
11
Marketplace 5306-01-319-4844
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-319-4844 2+ Documents (More...)
Restrictions 5306-01-319-4844
5306-01-319-4844 is a Close Tolerance Bolt that is an aviation critical safety item or flight safety critical aircraft part. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-319-4844
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-319-4844
- US Air Force (FXX5)
- Effective Date:
- 1 Aug 2003
- Former MOE Rule:
- FNN5
- Supplementary Collaborators:
- TN
Approved Sources 5306-01-319-4844
- Part Number
- Manufacturer
- Status
- VCJ001-16-104
- Manufacturer
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- PB1420-16-104
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- AIC1635-16-104
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VS3319-16-104
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- MB209-16-104
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- 123709-16-104
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- SI1188-16-104
- 57928 - Sonic Industries, Inc. (Active)
- Primary Buy
- Primary Buy
- MB209-16-104
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- VCJ0001-16-104
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- DF33003-16-104
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A098-16-104
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- X409-16-104
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 123709-16-104
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- AIC1653-16-104
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- X409-16-104
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- DF33003-16-104
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-319-4844
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 7.718 Inches Nominal
- Grip Diameter [AAUR]
- 0.9980 Inches Minimum And 0.9990 Inches Maximum
- Grip Length [ANEE]
- 6.485 Inches Minimum And 6.515 Inches Maximum
- Head Height [AASU]
- 0.529 Inches Minimum And 0.559 Inches Maximum
- Head Style [AASK]
- Spline Drive Shear Head
- Head Minor Diameter [AAZH]
- 1.487 Inches Minimum
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 125000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 1.000 Inches
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 1.218 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 12
DLA Procurement Analysis 5306-01-319-4844
- Last Stock Position:
- 14 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-319-4844
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FW
- B-2 AIRCRAFT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-319-4844
Freight Information 5306-01-319-4844
5306-01-319-4844 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-319-4844 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-319-4844 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-319-4844 is not classified as a special type of cargo when transported by water. 5306-01-319-4844 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-319-4844
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-01-319-4844 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: