Premium Information is available for this item - Upgrade for $1 a day
5306-01-283-1752
Shear Bolt
5306012831752 012831752 NASM1297 NASM8906 MS21297-10049
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS. View more Shear Bolt
November 2023
9
Marketplace 5306-01-283-1752
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-283-1752 5+ Documents (More...)
NASM1297 NASM8906 MS21297-10049 A high strength, 160,000 pounds per square inch (1100 megapascals) minimum
United States (US) 4. 5306-01-283-1752 Marketplace Restrictions Approved Sources Datasheet Management
https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-446-4016 Shear Bolt 5306014464016014464016,NASM8906
Shear Bolt 5306012831752 012831752,NASM1297 $1 a day Upgrade your Account Upgrade 5306-01-283-1752Shear
https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-281-0558 Shear Bolt 5306012810558012810558,NASM8906
Shear Bolt 5306012831752 012831752,NASM1297 $1 a day Upgrade your Account Upgrade 5306-01-281-7810Shear
Shear Bolt 5306012831752 012831752,NASM1297 $1 a day Upgrade your Account Upgrade 5306-01-283-1752Shear
Bolt5306012831752 012831752 NASM1297 NASM8906 https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-446
https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-417-3774 Shear Bolt 5306014173774014173774,NASM8906
https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-01-419-6026 Shear Bolt 5306014196026 014196026,NASM8906
Restrictions 5306-01-283-1752
5306-01-283-1752 is a Shear Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-283-1752
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-283-1752
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Jul 2007
- Singapore (YJ01)
- Effective Date:
- 1 Mar 1999
- Republic of Korea (ZH01)
- Effective Date:
- 1 Mar 1997
Approved Sources 5306-01-283-1752
- Part Number
- Manufacturer
- Status
- MS21297-10049
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NASM1297
- 80205 - National Aerospace Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- NASM8906
- 80205 - National Aerospace Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS21297-10049
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-283-1752
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Thickness [AATD]
- 0.080 Inches Minimum And 0.100 Inches Maximum
- Extended Washer Diameter [AATC]
- 1.153 Inches Minimum And 1.163 Inches Maximum
- Fastener Length [AASB]
- 4.067 Inches Minimum And 4.097 Inches Maximum
- Grip Diameter [AAUR]
- 0.623 Inches Minimum And 0.624 Inches Maximum
- Grip Length [ANEE]
- 3.052 Inches Minimum And 3.072 Inches Maximum
- Hardness Rating [CQFM]
- 46.0 Rockwell C Minimum Overall And 50.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.552 Inches Minimum And 0.572 Inches Maximum
- Head Style [AASK]
- Spline Extended Washer
- Head Minor Diameter [AAZH]
- 0.673 Inches Minimum And 0.688 Inches Maximum
- Material [MATT]
- Steel Comp H11 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.625 Inches
- Material Document And Classification [MDCL]
- Ams6487 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Treatment Document And Classification [STDC]
- Mil-C-8837 Ty 2 Cl 3 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.995 Inches Minimum And 1.045 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 18
Weapon Systems (WSDC) 5306-01-283-1752
DLA Procurement Analysis 5306-01-283-1752
- Last Stock Position:
- 83 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-283-1752
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-01-283-1752
Freight Information 5306-01-283-1752
5306-01-283-1752 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-283-1752 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-283-1752 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-283-1752 is not classified as a special type of cargo when transported by water. 5306-01-283-1752 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-283-1752
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5306-01-283-1752 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A621V714N
- 24 Aug 2021
- Subscribe
- 89
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V2077
- 01 Dec 2016
- Subscribe
- 124
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V7447
- 06 Jun 2016
- Subscribe
- 59
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V4084
- 02 Mar 2016
- Subscribe
- 41
- Subscribe
- Subscribe
- Subscribe
- SPE5E416MQA66
- 05 Nov 2015
- Subscribe
- 70
- Subscribe
- Subscribe
- Subscribe
- SPE5E414V1752
- 15 Nov 2013
- Subscribe
- 75
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-283-1752 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: